X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy — Part 1: Radiation characteristics and production methods

Radiological protection — X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy — Part 1: Radiation characteristics and production methods

X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy — Part 2: Dosimetry for radiation protection over the energy ranges from 8 keV to 1,3 MeV and 4 MeV to 9 MeV

Radiological protection — X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy — Part 2: Dosimetry for radiation protection over the energy ranges from 8 keV to 1,3 MeV and 4 MeV to 9 MeV

X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy — Part 3: Calibration of area and personal dosemeters and the measurement of their response as a function of energy and angle of incidence

Radiological protection — X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy — Part 3: Calibration of area and personal dosemeters and the measurement of their response as a function of energy and angle of incidence

X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy — Part 4: Calibration of area and personal dosemeters in low energy X reference radiation fields

Radiological protection — X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy — Part 4: Calibration of area and personal dosemeters in low energy X reference radiation fields

X and gamma reference radiations for calibrating dosemeters and dose ratemeters and for determining their response as a function of photon energy

X and gamma reference radiations for calibrating dosemeters and dose ratemeters and for determining their response as a function of photon energy — Addendum 1: High rate series of filtered X-radiations

X and gamma reference radiations for calibrating dosemeters and dose ratemeters and for determining their response as a function of photon energy — Amendment 1: Low rate series of filtered X-radiations

X and gamma reference radiations for calibrating dosemeters and dose ratemeters and for determining their response as a function of photon energy — Addendum 2: Photon reference radiations at energies between 4 MeV and 9 MeV

Water quality — Radium 226 — Test method using ICP-MS

Water quality — Zirconium 93 — Test method using ICP-MS

Water quality — Protactinium 231 — Test method using ICP-MS

Water quality — Strontium 90 — Test method using ICP-MS

Water quality — Thorium 232 — Part 1: Test method using alpha spectrometry

Water quality — Thorium 232 — Part 2: Test method using ICP-MS

Water quality — Actinium-227 — Test method using alpha-spectrometry

Nuclear energy — Reference beta-particle radiation — Part 1: Methods of production

Nuclear energy — Reference beta-particle radiation — Part 1: Methods of production

Nuclear energy — Reference beta-particle radiation — Part 1: Methods of production

Nuclear energy — Reference beta-particle radiation — Part 2: Calibration fundamentals related to basic quantities characterizing the radiation field

Nuclear energy — Reference beta-particle radiation — Part 2: Calibration fundamentals related to basic quantities characterizing the radiation field

Nuclear energy — Reference beta-particle radiation — Part 2: Calibration fundamentals related to basic quantities characterizing the radiation field

Nuclear energy — Reference beta-particle radiation — Part 3: Calibration of area and personal dosemeters and the determination of their response as a function of beta radiation energy and angle of incidence

Nuclear energy — Reference beta-particle radiation — Part 3: Calibration of area and personal dosemeters and the determination of their response as a function of beta radiation energy and angle of incidence

Nuclear energy — Reference beta-particle radiation — Part 3: Calibration of area and personal dosemeters and the determination of their response as a function of beta radiation energy and angle of incidence

Reference beta radiations for calibrating dosemeters and doseratemeters and for determining their response as a function of beta radiation energy

Reference beta radiations for calibrating dosemeters and dose-rate meters and for determining their response as a function of beta-radiation energy

Reference neutron radiations — Part 1: Characteristics and methods of production

Reference neutron radiations — Part 1: Characteristics and methods of production — Technical Corrigendum 1

Neutron reference radiations fields — Part 1: Characteristics and methods of production

Reference neutron radiations — Part 2: Calibration fundamentals of radiation protection devices related to the basic quantities characterizing the radiation field

Reference neutron radiations — Part 3: Calibration of area and personal dosimeters and determination of response as a function of energy and angle of incidence

Neutron reference radiation fields — Part 3: Calibration of area and personal dosemeters and determination of their response as a function of neutron energy and angle of incidence

Neutron reference radiations for calibrating neutron-measuring devices used for radiation protection purposes and for determining their response as a function of neutron energy

Reference sources for the calibration of surface contamination monitors — Part 2: Electrons of energy less than 0,15 MeV and photons of energy less than 1,5 MeV

Reference sources for the calibration of surface contamination monitors — Beta-emitters (maximum beta energy greater than 0,15 MeV) and alpha-emitters

Reference sources — Calibration of surface contamination monitors — Alpha-, beta- and photon emitters

Reference sources — Calibration of surface contamination monitors — Alpha-, beta- and photon emitters

Measurement of radioactivity — Alpha-, beta- and photon emitting radionuclides — Reference measurement standard specifications for the calibration of surface contamination monitors

Dosimetry of X and gamma reference radiations for radiation protection over the energy range from 8 keV to 1,3 MeV

Water quality — Measurement of gross alpha activity in non-saline water — Thick source method

Water quality — Gross alpha activity — Test method using thick source

Procedures for calibrating and determining the response of neutron-measuring devices used for radiation protection purposes

Water quality — Determination of the activity concentration of radionuclides — Method by high resolution gamma-ray spectrometry

Water quality — Gamma-ray emitting radionuclides — Test method using high resolution gamma-ray spectrometry

Measurement of radioactivity in the environment — Air: radon-222 — Part 1: Origins of radon and its short-lived decay products and associated measurement methods

Measurement of radioactivity in the environment — Air: radon-222 — Part 1: Origins of radon and its short-lived decay products and associated measurement methods

Measurement of radioactivity in the environment — Air: radon-222 — Part 2: Integrated measurement method for determining average potential alpha energy concentration of its short-lived decay products

Measurement of radioactivity in the environment — Air: radon-222 — Part 2: Integrated measurement method for determining average potential alpha energy concentration of its short-lived decay products

Measurement of radioactivity in the environment — Air: radon-222 — Part 3: Spot measurement method of the potential alpha energy concentration of its short-lived decay products

Measurement of radioactivity in the environment — Air: radon-222 — Part 3: Spot measurement method of the potential alpha energy concentration of its short-lived decay products

Measurement of radioactivity in the environment — Air: radon-222 — Part 4: Integrated measurement method for determining average activity concentration using passive sampling and delayed analysis

Measurement of radioactivity in the environment — Air: radon-222 — Part 4: Integrated measurement method for determining average activity concentration using passive sampling and delayed analysis

Measurement of radioactivity in the environment — Air: radon-222 — Part 4: Integrated measurement method for determining average activity concentration using passive sampling and delayed analysis

Measurement of radioactivity in the environment — Air: radon-222 — Part 5: Continuous measurement method of the activity concentration

Measurement of radioactivity in the environment — Air: radon-222 — Part 5: Continuous measurement methods of the activity concentration

Measurement of radioactivity in the environment — Air: radon-222 — Part 6: Spot measurement method of the activity concentration

Measurement of radioactivity in the environment — Air: radon-222 — Part 6: Spot measurement methods of the activity concentration

Measurement of radioactivity in the environment — Air: radon-222 — Part 7: Accumulation method for estimating surface exhalation rate

Measurement of radioactivity in the environment — Air: radon-222 — Part 8: Methodologies for initial and additional investigations in buildings

Measurement of radioactivity in the environment — Air: radon-222 — Part 8: Methodologies for initial and additional investigations in buildings

Measurement of radioactivity in the environment — Air: Radon-222 — Part 9: Test methods for exhalation rate of building materials

Measurement of radioactivity in the environment — Air: Radon-222 — Part 9: Test methods for exhalation rate of building materials

Measurement of radioactivity in the environment — Air: radon-222 — Part 11: Test method for soil gas with sampling at depth

Measurement of radioactivity in the environment — Air: radon-222 — Part 12: Determination of the diffusion coefficient in waterproof materials: membrane one-side activity concentration measurement method

Measurement of radioactivity in the environment — Air: radon 222 — Part 13: Determination of the diffusion coefficient in waterproof materials: membrane two-side activity concentration test method

Water quality — Measurement of gross alpha and beta activity concentration in non-saline water — Liquid scintillation counting method

Water quality — Gross alpha and gross beta activity — Test method using liquid scintillation counting

Determination of the detection limit and decision threshold for ionizing radiation measurements — Part 1: Fundamentals and application to counting measurements without the influence of sample treatment

Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation — Fundamentals and application — Part 1: Elementary applications

Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation — Fundamentals and application — Part 1: Elementary applications

Determination of the detection limit and decision threshold for ionizing radiation measurements — Part 2: Fundamentals and application to counting measurements with the influence of sample treatment

Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation — Fundamentals and application — Part 2: Advanced applications

Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation — Fundamentals and application — Part 2: Advanced applications

Determination of the detection limit and decision threshold for ionizing radiation measurements — Part 3: Fundamentals and application to counting measurements by high resolution gamma spectrometry, without the influence of sample treatment

Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation — Fundamentals and application — Part 3: Applications to unfolding methods

Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation — Fundamentals and application — Part 3: Applications to unfolding methods

Determination of the detection limit and decision threshold for ionizing radiation measurements — Part 4: Fundamentals and application to measurements by use of linear-scale analogue ratemeters, without the influence of sample treatment

Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation — Fundamentals and application — Part 4: Guidelines to applications

Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation — Fundamentals and application — Part 4: Guidelines to applications

Determination of the detection limit and decision threshold for ionizing radiation measurements — Part 5: Fundamentals and applications to counting measurements on filters during accumulation of radioactive material

Determination of the detection limit and decision threshold for ionizing radiation measurements — Part 6: Fundamentals and applications to measurements by use of transient mode

Determination of the detection limit and decision threshold for ionizing radiation measurements — Part 7: Fundamentals and general applications

Determination of the detection limit and decision threshold for ionizing radiation measurements — Part 8: Fundamentals and application to unfolding of spectrometric measurements without the influence of sample treatment

Determination of the characteristic limits (decision threshold, detection limit and limits of the confidence interval) for measurements of ionizing radiation — Fundamentals and application

Reference radiation fields — Simulated workplace neutron fields — Part 1: Characteristics and methods of production

Reference radiation fields — Simulated workplace neutron fields — Part 2: Calibration fundamentals related to the basic quantities

Reference neutron radiations — Characteristics and methods of production of simulated workplace neutron fields

Water quality — Strontium 90 and strontium 89 — Test methods using liquid scintillation counting or proportional counting

Water quality — Strontium 90 and strontium 89 — Test methods using liquid scintillation counting or proportional counting

Water quality — Measurement of polonium 210 activity concentration in water by alpha spectrometry

Water quality — Polonium 210 — Test method using alpha spectrometry

Water quality — Determination of carbon 14 activity — Liquid scintillation counting method

Water quality — Carbon 14 — Test method using liquid scintillation counting

Water quality — Lead-210 — Test method using liquid scintillation counting

Water quality — Lead-210 — Test method using liquid scintillation counting

Water quality — Radon-222 — Part 1: General principles

Water quality — Radon-222 — Part 2: Test method using gamma-ray spectrometry

Water quality — Radon-222 — Part 3: Test method using emanometry

Water quality — Radon-222 — Part 4: Test method using two-phase liquid scintillation counting

Water quality — Radon-222 — Part 4: Test method using two-phase liquid scintillation counting

Water quality — Radium-226 — Part 1: Test method using liquid scintillation counting

Water quality — Radium-226 — Part 1: Test method using liquid scintillation counting

Water quality — Radium-226 — Part 2: Test method using emanometry

Water quality — Radium-226 — Part 2: Test method using emanometry

Water quality — Radium-226 — Part 3: Test method using coprecipitation and gamma-spectrometry

Water quality — Radium-226 — Part 3: Test method using coprecipitation and gamma-ray spectrometry

Water quality — Radium-226 — Part 4: Test method using alpha spectrometry

Water quality — Plutonium, americium, curium and neptunium — Test method using alpha spectrometry

Water quality — Plutonium, americium, curium and neptunium — Test method using alpha spectrometry

Water quality — Uranium — Test method using alpha liquid scintillation counting

Radiological protection — Minimum criteria for electron paramagnetic resonance (EPR) spectroscopy for retrospective dosimetry of ionizing radiation — Part 1: General principles

Radiological protection — Minimum criteria for electron paramagnetic resonance (EPR) spectroscopy for retrospective dosimetry of ionizing radiation — Part 1: General principles

Radiological protection — Minimum criteria for electron paramagnetic resonance (EPR) spectroscopy for retrospective dosimetry of ionizing radiation — Part 2: Ex vivo human tooth enamel dosimetry

Nuclear energy — Waste-packages activity measurement — Part 1: High-resolution gamma spectrometry in integral mode with open geometry

Practice for dosimetry in gamma irradiation facilities for food processing

Practice for use of a ceric-cerous sulfate dosimetry system

Guide for selection and calibration of dosimetry systems for radiation processing

Practice for use of a radiochromic film dosimetry system

Practice for use of a polymethylmethacrylate dosimetry system

Practice for use of a radiochromic optical waveguide dosimetry system

Practice for characterization and performance of a high-dose radiation dosimetry calibration laboratory

Practice for use of a dichromate dosimetry system

Practice for dosimetry in electron and bremsstrahlung irradiation facilities for food processing

Practice for use of the ethanol-chlorobenzene dosimetry system

Guide for use of radiation-sensitive indicators

Practice for use of a radiochromic liquid dosimetry system

Practice for use of the alanine-EPR dosimetriy system

Practice for dosimetry in an X-ray (bremsstrahlung) facility for radiation processing

Practice for use of calorimetric dosimetry systems for electron beam dose measurements and dosimeter calibrations

Practice for dosimetry in an electron-beam facility for radiation processing at energies between 300 keV and 25 MeV

Practice for use of cellulose acetate dosimetry system

Practice for dosimetry in a gamma irradiation facility for radiation processing

Guide for estimating uncertainties in dosimetry for radiation processing

Practice for dosimetry in an electron-beam facility for radiation processing at energies between 80 keV and 300 keV

Radiological protection — Monitoring and internal dosimetry for specific materials — Part 1: Inhalation of uranium compounds

Radiological protection — Monitoring and internal dosimetry for specific materials — Part 2: Ingestion of uranium compounds

Measurement of radioactivity in the environment — Air — Radon 220: Integrated measurement methods for the determination of the average activity concentration using passive solid-state nuclear track detectors

Measurement of radioactivity in the environment — Bioindicators — Part 1: General guide for the sampling, conditioning and pre-treatment

Measurement of radioactivity in the environment — Soil — Part 1: General guidelines and definitions

Measurement of radioactivity in the environment — Soil — Part 1: General guidelines and definitions

Measurement of radioactivity in the environment — Soil — Part 2: Guidance for the selection of the sampling strategy, sampling and pre-treatment of samples

Measurement of radioactivity in the environment — Soil — Part 2: Guidance for the selection of the sampling strategy, sampling and pre-treatment of samples

Measurement of radioactivity in the environment — Soil — Part 2: Guidance for the selection of the sampling strategy, sampling and pre-treatment of samples

Measurement of radioactivity in the environment — Soil — Part 3: Measurement of gamma-emitting radionuclides

Measurement of radioactivity in the environment — Soil — Part 3: Test method of gamma-emitting radionuclides using gamma-ray spectrometry

Measurement of radioactivity in the environment — Soil — Part 3: Test method of gamma-emitting radionuclides using gamma-ray spectrometry

Measurement of radioactivity in the environment — Soil — Part 4: Measurement of plutonium isotopes (plutonium 238 and plutonium 239 + 240) by alpha spectrometry

Measurement of radioactivity in the environment — Soil — Part 4: Plutonium 238 and plutonium 239 + 240 — Test method using alpha spectrometry

Measurement of radioactivity in the environment — Soil — Part 5: Measurement of strontium 90

Measurement of radioactivity in the environment — Soil — Part 5: Strontium 90 — Test method using proportional counting or liquid scintillation counting

Measurement of radioactivity in the environment — Soil — Part 6: Measurement of gross alpha and gross beta activities

Measurement of radioactivity in the environment — Soil — Part 6: Gross alpha and gross beta activities — Test method using gas-flow proportional counting

Measurement of radioactivity in the environment — Soil — Part 7: In situ measurement of gamma-emitting radionuclides

Measurement of radioactivity in the environment — Soil — Part 7: In situ measurement of gamma-emitting radionuclides

Guidance for gamma spectrometry measurement of radioactive waste

Radiation protection — Performance criteria for service laboratories performing biological dosimetry by cytogenetics

Radiological protection — Performance criteria for service laboratories performing biological dosimetry by cytogenetics

Radiological protection — Performance criteria for service laboratories performing biological dosimetry by cytogenetics — Dicentric assay

Measurement of radioactivity — Determination of beta emitters activities — Test method using liquid scintillation counting

Measurement of radioactivity — Determination of beta emitters activities — Test method using liquid scintillation counting

Radiological protection — Measurement for the clearance of waste contaminated with radioisotopes for medical application — Part 1: Measurement of radioactivity

Radiological protection — Measurement for the clearance of waste contaminated with radioisotopes for medical application — Part 2: Management of solid radioactive waste in nuclear medicine facilities

Measurement of radioactivity — Gamma emitting radionuclides — Rapid screening method using scintillation detector gamma-ray spectrometry

Measurement of radioactivity — Gamma emitting radionuclides — Rapid screening method using scintillation detector gamma-ray spectrometry

Measurement of radioactivity in the environment — Guidelines for effective dose assessment using environmental monitoring data — Part 1: Planned and existing exposure situation

Measurement of radioactivity in the environment — Guidelines for effective dose assessment using environmental monitoring data — Part 2: Emergency exposure situation

Measurement of radioactivity in the environment — Air: aerosol particles — Test method using sampling by filter media

Measurement of the radioactivity in the environment — Air: tritium — Test method using bubbler sampling

Dosimetry for exposures to cosmic radiation in civilian aircraft — Part 3: Measurements at aviation altitudes

Water quality — Plutonium and neptunium — Test method using ICP-MS

Radiological protection — Low dose rate calibration of instruments for environmental and area monitoring

Clinical dosimetry — Beta radiation sources for brachytherapy

Nuclear fuel technology — Determination of the O/M ratio in MOX pellets — Gravimetric method

Nuclear Energy — Fuel technology — Determination of the O/M ratio in MOX pellets by the gravimetric method

Water quality — Guidance for rapid radioactivity measurements in nuclear or radiological emergency situation

Water quality — Technetium-99 — Part 1: Test method using liquid scintillation counting

Water quality — Technetium-99 — Part 2: Test method using inductively coupled plasma mass spectrometry (ICP-MS)

Water quality — Iron-55 — Test method using liquid scintillation counting

Water quality — Radium 226 and Radium 228 — Test method using liquid scintillation counting

Measurement of radioactivity — Gamma emitting radionuclides — Reference measurement standard specifications for the calibration of gamma-ray spectrometers

Measurement of radioactivity — Alpha emitting radionuclides — Generic test method using alpha spectrometry

Water quality — Nickel-59 and nickel-63 — Part 1: Test method using liquid scintillation counting

Water quality — Nickel-59 and nickel-63 — Part 2: Test method using ICP-MS

Radiological protection — Content of input data for the statistical analysis of dose records of individuals monitored for occupational exposure to ionizing radiation

Practice for using the Fricke dosimetry system

Practice for dosimetry in gamma irradiation facilities for food processing

Practice for dosimetry in gamma irradiation facilities for food processing

Practice for use of a ceric-cerous sulfate dosimetry system

Practice for use of a ceric-cerous sulfate dosimetry system

Practice for use of a ceric-cerous sulfate dosimetry system

Guide for selection and calibration of dosimetry systems for radiation processing

Practice for calibration of routine dosimetry systems for radiation processing

Practice for use of a radiochromic film dosimetry system

Practice for use of a radiochromic film dosimetry system

Practice for use of a radiochromic film dosimetry system

Practice for use of a polymethylmethacrylate dosimetry system

Practice for use of a polymethylmethacrylate dosimetry system

Practice for use of a polymethylmethacrylate dosimetry system

Practice for use of a polymethylmethacrylate dosimetry system

Practice for use of a radiochromic optical waveguide dosimetry system

Practice for use of a radiochromic optical waveguide dosimetry system

Practice for use of a radiochromic optical waveguide dosimetry system

Practice for characterization and performance of a high-dose radiation dosimetry calibration laboratory

Practice for characterization and performance of a high-dose radiation dosimetry calibration laboratory

Practice for use of a dichromate dosimetry system

Practice for use of a dichromate dosimetry system

Practice for use of a dichromate dosimetry system

Practice for dosimetry in electron and bremsstrahlung irradiation facilities for food processing

Practice for dosimetry in electron beam and X-ray (bremsstrahlung) irradiation facilities for food processing

Practice for use of the ethanol-chlorobenzene dosimetry system

Practice for use of the ethanol-chlorobenzene dosimetry system

Practice for use of the ethanol-chlorobenzene dosimetry system

Guide for use of radiation-sensitive indicators

Guide for use of radiation-sensitive indicators

Guide for use of radiation-sensitive indicators

Guidance for use of radiation-sensitive indicators

Practice for use of a radiochromic liquid dosimetry system

Practice for use of a radiochromic liquid dosimetry system

Practice for use of the alanine-EPR dosimetriy system

Practice for use of the alanine-EPR dosimetry system

Practice for use of the alanine-EPR dosimetry system

Practice for dosimetry in an X-ray (bremsstrahlung) facility for radiation processing

Practice for dosimetry in an X-ray (bremsstrahlung) facility for radiation processing

Practice for dosimetry in an X-ray (bremsstrahlung) facility for radiation processing at energies between 50 keV and 7.5 MeV

Practice for use of calorimetric dosimetry systems for electron beam dose measurements and dosimeter calibrations

Practice for use of calorimetric dosimetry systems for electron beam dose measurements and dosimeter calibrations

Practice for use of calorimetric dosimetry systems for electron beam dose measurements and dosimetery system calibrations

Practice for use of calorimetric dosimetry systems for dose measurements and dosimetry system calibration in electron beams

Practice for dosimetry in an electron-beam facility for radiation processing at energies between 300 keV and 25 MeV

Practice for dosimetry in an electron beam facility for radiation processing at energies between 300 keV and 25 MeV

Practice for dosimetry in an electron beam facility for radiation processing at energies between 300 keV and 25 MeV

Practice for use of a cellulose triacetate dosimetry system

Practice for use of a cellulose triacetate dosimetry system

Practice for use of a cellulose triacetate dosimetry system

Practice for dosimetry in a gamma irradiation facility for radiation processing

Practice for dosimetry in a gamma irradiation facility for radiation processing

Practice for dosimetry in a gamma facility for radiation processing

Guide for estimating uncertainties in dosimetry for radiation processing

Guide for estimating uncertainties in dosimetry for radiation processing

Guide for estimation of measurement uncertainty in dosimetry for radiation processing

Practice for dosimetry in an electron-beam facility for radiation processing at energies between 80 keV and 300 keV

Practice for dosimetry in an electron beam facility for radiation processing at energies between 80 and 300 keV

Practice for dosimetry in an electron beam facility for radiation processing at energies between 80 and 300 keV

Practice for dosimetry in an electron beam facility for radiation processing at energies between 80 and 300 keV

Guide for dosimetry in radiation research on food and agricultural products

Guide for dosimetry in radiation research on food and agricultural products

Guidance for dosimetry for radiation research

Practice for blood irradiation dosimetry

Practice for blood irradiation dosimetry

Practice for blood irradiation dosimetry

Practice for blood irradiation dosimetry

Guide for dosimetry for irradiation of insects for sterile release programs

Guide for dosimetry for sterile insects release programs

Guide for dosimetry for sterile insects release programs

Guidance for dosimetry for sterile insects release programs

Practice for use of thermoluminescence-dosimetry (TLD) systems for radiation processing

Practice for use of thermoluminescence dosimetry (TLD) systems for radiation processing

Practice for use of a thermoluminescence-dosimetry system (TLD system) for radiation processing

Practice for dosimetry for a self-contained dry-storage gamma-ray irradiator

Practice for dosimetry for a self-contained dry-storage gamma irradiator

Guide for absorbed-dose mapping in radiation processing facilities

Standard practice for dosimetry in radiation processing

Standard practice for dosimetry in radiation processing

Guide for performance characterization of dosimeters and dosimetry systems for use in radiation processing

Calibration and quality control in the use of radionuclide calibrators