ISO 12714:1999

No disponible en español

Publicado (Edición 1, 1999)

Esta publicación se revisó y confirmó por última vez en 2023. Por lo tanto, esta versión es la actual.

CHF 96

Convertir Franco suizo (CHF) a tu moneda

Resumen

This International Standard specifies a method for the secondary calibration of acoustic emission sensors as

receivers of elastic waves at the surface of a solid medium. The International Standard is applicable to laboratory

tertiary standard sensors and acoustic emission applications sensors.

The secondary calibration yields the frequency response of a sensor to waves of a type normally encountered in

acoustic emission work, namely Rayleigh waves. The source producing the signal used for the calibration is

mounted on the same surface of a test block as the sensor under test (SUT). The sensitivity of the sensor is

determined for excitation within the range of 100 kHz to 1 MHz. Sensitivity values are usually determined at

frequencies approximately 10 kHz apart. The units of the calibration are volts per unit of mechanical input

(displacement, velocity or acceleration).

Esta norma contribuye a los siguientes Objetivos de Desarrollo Sostenible