Numéro de référence
ISO 21013-3:2006
© ISO 2024
ISO 21013-3:2006
Récipients cryogéniques — Dispositifs de sécurité pour le service cryogénique — Partie 3: Détermination de la taille et du volume
Edition 1
2006-01
Annulée
Annulée (Edition 1, 2006)

Résumé

ISO 21013-3:2006 provides separate calculation methods for determining the required mass flow to be relieved for each of the following specified conditions.

  • Vacuum-insulated vessels with insulation system (outer jacket + insulating material) intact under normal vacuum; outer jacket at ambient temperature; inner vessel at temperature of the contents at the relieving pressure.
  • Vacuum-insulated vessels with insulation system (outer jacket + insulating material) intact under normal vacuum; outer jacket at ambient temperature; inner vessel at temperature of the contents at the relieving pressure; pressure regulator of the pressure build-up system functioning at full potential.
  • Vacuum-insulated vessels with insulation system remaining in place but with loss of vacuum, or non-vacuum-insulated vessels with insulation system intact; outer jacket at ambient temperature; inner vessel at temperature of the contents at the relieving pressure; vacuum or non-vacuum-insulated vessels with insulation system remaining fully or partially in place, but with loss of vacuum in the case of vacuum-insulated vessels, and fire engulfment; inner vessel at temperature of the contents at the relieving pressure.
  • Vessels with insulation system totally lost and fire engulfment.

Good engineering practice based on well-established theoretical physical science needs to be adopted to determine the required mass flow where an appropriate calculation method is not provided for an applicable condition.

Informations générales

  • État actuel
     : Annulée
    Date de publication
     : 2006-01
    Stade
    : Annulation de la Norme internationale [95.99]
  • Edition
     : 1
  • Comité technique :
    ISO/TC 220
    ICS :
    23.020.40 
  • RSS mises à jour

Cycle de vie

Vous avez une question?

Consulter notre Aide et assistance

  2. Store
  3. Catalogue de normes
  4. TC
  5. ISO/TC 220
  6. ISO 21013-3:2006