Norme internationale
ISO 12614-10:2021
Véhicules routiers — Équipements pour véhicules utilisant le gaz naturel liquéfié (GNL) comme combustible — Partie 10: Tuyauterie rigide pour combustible en acier inoxydable
Numéro de référence
ISO 12614-10:2021
Edition 2
2021-06
Norme internationale
Prévisualiser
ISO 12614-10:2021
77666
Indisponible en français
Publiée (Edition 2, 2021)

ISO 12614-10:2021

ISO 12614-10:2021
77666
Langue
Format
CHF 42
Convertir les francs suisses (CHF) dans une autre devise

Résumé

This document specifies tests and requirements for the rigid fuel line, a liquefied natural gas fuel system component intended for use on the types of motor vehicles defined in ISO 3833. This document is not applicable to the following:

a) fuel containers;

b) stationary gas engines;

c) container mounting hardware;

d) electronic fuel management;

e) refuelling receptacles.

It is recognized that miscellaneous components not specifically covered herein can be examined to meet the criteria of this document and tested according to the appropriate functional tests.

All references to pressure in this document are to be considered gauge pressures unless otherwise specified.

This document is based upon a working pressure for natural gas as a fuel of 1,6 MPa (16 bar1). Other working pressures can be accommodated by adjusting the pressure by the appropriate factor (ratio). For example, a 2 MPa (20 bar) working pressure system will require pressures to be multiplied by 1,25.

 

1 1 bar = 0,1 MPa = 105 Pa; 1 MPa = 1 N/mm2.

Informations générales

  •  : Publiée
     : 2021-06
    : Norme internationale publiée [60.60]
  •  : 2
  • ISO/TC 22/SC 41
    43.060.40 
  • RSS mises à jour

Vous avez une question?

Consulter notre Aide et assistance