ISO/DIS 23581
u
ISO/DIS 23581
81855

This document specifies a procedure for the determination of kinematic viscosity (ν) by calculation from dynamic viscosity (η) and density (ρ) of both transparent and opaque liquid petroleum products and crude oils using the Stabinger type viscometer.

The result obtained using the procedure described in this document depends on the rheological behaviour of the sample. This document is predominantly applicable to liquids whose shear stress and shear rate are proportional (Newtonian flow behaviour). If the viscosity changes significantly with the shear rate, comparison with other measuring methods is not possible except at similar shear rates.

The precision has been determined only for the materials, density ranges and temperatures described in Clause 13. The test method may be applied to a wider range of viscosity, density, temperature and materials. The precision and bias may not be applicable for materials not listed in Clause 13.


Informations générales 

  •  : Projet
  •  : 2
     : 22
  •  : ISO/TC 28 Produits pétroliers et produits connexes, combustibles et lubrifiants d’origine synthétique ou biologique
  •  :
    75.080 Produits pétroliers en général

Acheter cette norme

fr
Format Langue
std 1 61 PDF
std 2 61 Papier
  • CHF61

Vous avez une question?

Consulter notre FAQ

Service à la clientèle
+41 22 749 08 88

Horaires d’ouverture:
De lundi à vendredi - 09:00-12:00, 14:00-17:00 (UTC+1)