Steel pipes and tubes for specific use, смотри 77.140.75
Фильтр :
Стандарт и/или проект Этап ТК
Grey iron pipes, special castings and grey iron parts for pressure main lines
95.99 ISO/TC 5/SC 2
Metal pipes — Steel sockets screwed according to ISO 7
95.99 ISO/TC 5
Withdrawal of ISO 64-1974
95.99 ISO/TC 5
Carbon steel tubes suitable for screwing in accordance with ISO 7-1
95.99 ISO/TC 5/SC 1
Withdrawal of ISO 134-1973
95.99 ISO/TC 5
Flanging test on steel tubes
95.99 ISO/TC 164/SC 2
Drift expanding test on steel tubes
95.99 ISO/TC 164/SC 2
Bend test on steel tubes
95.99 ISO/TC 164/SC 2
Flattening test on steel tubes
95.99 ISO/TC 164/SC 2
Steel tubes — Wall thicknesses
95.99 ISO/TC 5
Withdrawal of ISO/R 285-1962
95.99 ISO/TC 5
Withdrawal of ISO 336-1976
95.99 ISO/TC 5
Ring expanding test on steel tubes
95.99 ISO/TC 164/SC 2
Steel — Tensile testing of tubes
95.99 ISO/TC 164/SC 1
Withdrawal of ISO/R 531-1966
95.99 ISO/TC 5
Withdrawal of ISO 560-1975
95.99 ISO/TC 5
Stainless steel tubes — Dimensions, tolerances and conventional masses per unit length
95.99 ISO/TC 5/SC 1
Stainless steel tubes — Dimensions, tolerances and conventional masses per unit length
90.93 ISO/TC 5/SC 1
Withdrawal of ISO/R 1128-1969
95.99 ISO/TC 5
Metallic materials — Hardness test — Calibration of standardized blocks to be used for Rockwell superficial hardness testing machines (scales 15N, 30N, 45N, 15T, 30T and 45T)
95.99 ISO/TC 164/SC 3
Ductile iron pipes, fittings and accessories for pressure pipe-lines
95.99 ISO/TC 5
Ductile iron pipes, fittings and accessories for pressure pipe-lines — Addendum 1
95.99 ISO/TC 5
Ductile iron pipes, fittings and accessories for pressure pipelines
95.99 ISO/TC 5/SC 2
Ductile iron pipes, fittings and accessories for pressure pipelines
95.99 ISO/TC 5/SC 2
Seamless plain end tubes made from unalloyed steel and without quality requirements
95.99 ISO/TC 5
Welded plain end tubes made from unalloyed steel and without quality requirements
95.99 ISO/TC 5
Steel products for pressure purposes — Quality requirements — Part 2: Wrought seamless tubes
95.99 ISO/TC 17/SC 19
Steel products for pressure purposes — Quality requirements — Part 3: Electric resistance and induction-welded tubes
95.99 ISO/TC 17/SC 19
Steel products for pressure purposes — Quality requirements — Part 4: Plates
95.99 ISO/TC 17/SC 10
Steel products for pressure purposes — Quality requirements — Part 5: Longitudinally welded austenitic stainless steel tubes
95.99 ISO/TC 17/SC 19
Steel products for pressure purposes — Quality requirements — Part 6: Submerged arc longitudinally or spirally welded steel tubes
95.99 ISO/TC 17/SC 19
Steel products for pressure purposes — Quality requirements — Part 7: Carbon steel plate (thicknesses over 100 to 250 mm)
95.99 ISO/TC 17/SC 10
Steel products for pressure purposes — Quality requirements — Part 8: Plates of weldable fine grain steels with high proof stress supplied in the normalized or quenched and tempered condition (thicknesses from 3 to 70 mm)
95.99 ISO/TC 17/SC 10
Plain end seamless precision steel tubes — Technical conditions for delivery
95.99 ISO/TC 5
Plain end seamless precision steel tubes — Technical conditions for delivery
95.99 ISO/TC 5/SC 1
Plain end welded precision steel tubes — Technical conditions for delivery
95.99 ISO/TC 5
Plain end welded precision steel tubes — Technical conditions for delivery
90.60 ISO/TC 5/SC 1
Plain end as-welded and sized precision steel tubes — Technical conditions for delivery
95.99 ISO/TC 5
Plain end as-welded and sized precision steel tubes — Technical conditions for delivery
90.60 ISO/TC 5/SC 1
Withdrawal of ISO/TR 3311-1975
95.99 ISO/TC 5
Withdrawal of ISO 3418-1975
95.99 ISO/TC 5
Steel tubes and fittings — Symbols for use in specifications — Part 1: Tubes and tubular accessories with circular cross-section
90.93 ISO/TC 5/SC 1
Steel tubes and fittings — Symbols for use in specifications — Part 2: Square and rectangular hollow sections
90.93 ISO/TC 5/SC 1
Steel tubes and tubular shaped accessories with circular cross-section — Symbols to be used in specifications
95.99 ISO/TC 5/SC 1
Ductile iron pipes for pressure pipelines — Centrifugal cement mortar lining — General requirements
95.99 ISO/TC 5
Ductile iron pipes for pressure and non-pressure pipelines — Centrifugal cement mortar lining — General requirements
95.99 ISO/TC 5/SC 2
Ductile iron pipes and fittings for pressure and non-pressure pipelines — Cement mortar lining
95.99 ISO/TC 5/SC 2
Ductile iron pipes and fittings for pressure and non-pressure pipelines — Cement mortar lining
60.60 ISO/TC 5/SC 2
Plain end steel tubes, welded and seamless — General tables of dimensions and masses per unit length
95.99 ISO/TC 5/SC 1
Plain end steel tubes, welded and seamless — General tables of dimensions and masses per unit length
90.60 ISO/TC 5/SC 1
Water aggressiveness evaluation and optimized lining choice
60.60 ISO/TC 5/SC 2
Environmental life cycle assessment and recycling of ductile iron pipes for water applications
60.60 ISO/TC 5/SC 2
Steel tubes — Tolerance systems
95.99 ISO/TC 5
Steel tubes — Tolerance systems
90.60 ISO/TC 5/SC 1
Steel pipes and fittings for buried or submerged pipe lines — External and internal coating by bitumen or coal tar derived materials
95.99 ISO/TC 5/SC 1
Steel tubes — Preparation of ends of tubes and fittings for welding
95.99 ISO/TC 5/SC 1
Design and asset management of DIP for water application — Part 2: Design, installation and operation
60.60 ISO/TC 5/SC 2
Stainless steel tubes suitable for screwing in accordance with ISO 7/1
95.99 ISO/TC 5/SC 1
Stainless steel tubes suitable for screwing in accordance with ISO 7/1 — Amendment 1
95.99 ISO/TC 5/SC 1
Stainless steel tubes suitable for screwing in accordance with ISO 7-1
95.99 ISO/TC 5/SC 1
Ductile iron pipes — External zinc coating — Part 1: Metallic zinc with finishing layer
95.99 ISO/TC 5/SC 2
Ductile iron pipes — External zinc-based coating — Part 1: Metallic zinc with finishing layer
95.99 ISO/TC 5/SC 2
Ductile iron pipes, fittings, accessories and their joints — External zinc-based coating — Part 1: Metallic zinc with finishing layer
90.93 ISO/TC 5/SC 2
Ductile iron pipes — External zinc coating — Part 2: Zinc rich paint with finishing layer
95.99 ISO/TC 5/SC 2
Ductile iron pipes, fittings, accessories and their joints — External zinc-based coating — Part 2: Zinc-rich paint
90.93 ISO/TC 5/SC 2
Ductile iron pipes — External zinc coating
95.99 ISO/TC 5/SC 2
Ductile iron pipes — Polyethylene sleeving
95.99 ISO/TC 5/SC 2
Ductile iron pipelines — Polyethylene sleeving for site application
95.99 ISO/TC 5/SC 2
Ductile iron pipelines — Polyethylene sleeving for site application
60.60 ISO/TC 5/SC 2
Steel tubes — Continuous character marking and colour coding for material identification
95.99 ISO/TC 5/SC 1
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes — Electromagnetic testing for verification of hydraulic leak-tightness
95.99 ISO/TC 17/SC 19
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes — Electromagnetic testing for verification of hydraulic leak-tightness
95.99 ISO/TC 17/SC 19
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes — Full peripheral ultrasonic testing for the detection of longitudinal imperfections
95.99 ISO/TC 17/SC 19
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes — Eddy current testing for the detection of imperfections
95.99 ISO/TC 17/SC 19
Seamless steel tubes for pressure purposes — Full peripheral ultrasonic testing for the detection of transverse imperfections
95.99 ISO/TC 17/SC 19
Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 1: Unalloyed steels with specified room temperature properties
90.60 ISO/TC 17/SC 19
Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 2: Unalloyed and alloyed steels with specified elevated temperature properties
90.60 ISO/TC 17/SC 19
Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 3: Unalloyed and alloyed steels with specified low temperature properties
90.60 ISO/TC 17/SC 19
Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 4: Austenitic stainless steels
90.60 ISO/TC 17/SC 19
Welded steel tubes for pressure purposes — Technical delivery conditions — Part 1: Unalloyed steel tubes with specified room temperature properties
90.60 ISO/TC 17/SC 19
Welded steel tubes for pressure purposes — Technical delivery conditions — Part 2: Electric resistance and induction welded unalloyed and alloyed steel tubes with specified elevated temperature properties
90.60 ISO/TC 17/SC 19
Welded steel tubes for pressure purposes — Technical delivery conditions — Part 3: Electric resistance and induction welded unalloyed and alloyed steel tubes with specified low temperature properties
90.60 ISO/TC 17/SC 19
Welded steel tubes for pressure purposes — Technical delivery conditions — Part 4: Submerged arc-welded unalloyed and alloyed steel tubes with specified elevated temperature properties
90.60 ISO/TC 17/SC 19
Welded steel tubes for pressure purposes — Technical delivery conditions — Part 5: Submerged arc-welded unalloyed and alloyed steel tubes with specified low temperature properties
90.60 ISO/TC 17/SC 19
Welded steel tubes for pressure purposes — Technical delivery conditions — Part 6: Longitudinally welded austenitic stainless steel tubes
90.60 ISO/TC 17/SC 19
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes — Full peripheral magnetic transducer/flux leakage testing of ferromagnetic steel tubes for the detection of longitudinal imperfections
95.99 ISO/TC 17/SC 19
Seamless steel tubes for pressure purposes — Full peripheral magnetic transducer/flux leakage testing of ferromagnetic steel tubes for the detection of transverse imperfections
95.99 ISO/TC 17/SC 19
Electric resistance and induction welded steel tubes for pressure purposes — Ultrasonic testing of the weld seam for the detection of longitudinal imperfections
95.99 ISO/TC 17/SC 19
Submerged arc-welded steel tubes for pressure purposes — Ultrasonic testing of the weld seam for the detection of longitudinal and/or transverse imperfections
95.99 ISO/TC 17/SC 19
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes — Ultrasonic testing for the detection of laminar imperfections
95.99 ISO/TC 17/SC 19
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes — Ultrasonic testing for the verification of hydraulic leak-tightness
95.99 ISO/TC 17/SC 19
Non-destructive testing of steel tubes — Automated ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for verification of hydraulic leak-tightness
90.60 ISO/TC 17/SC 19
Seamless and hot-stretch-reduced welded steel tubes for pressure purposes — Full peripheral ultrasonic thickness testing
95.99 ISO/TC 17/SC 19
Design method for ductile iron pipes
95.99 ISO/TC 5/SC 2
Design method for ductile iron pipes
90.92 ISO/TC 5/SC 2
Design method for ductile iron pipes
50.20 ISO/TC 5/SC 2
Non-destructive testing of steel tubes — Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness
90.60 ISO/TC 17/SC 19
Non-destructive testing of steel tubes — Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness — Amendment 1: Change of dimensions of the reference notch; change acceptance criteria
60.60 ISO/TC 17/SC 19
Non-destructive testing of steel tubes — Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections
90.60 ISO/TC 17/SC 19
Non-destructive testing of steel tubes — Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections — Amendment 1: Change of dimensions of the reference notch; change acceptance criteria
60.60 ISO/TC 17/SC 19
Non-destructive testing of steel tubes — Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections
90.60 ISO/TC 17/SC 19
Non-destructive testing of steel tubes — Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections — Amendment 1: Change of dimensions of the reference notch
60.60 ISO/TC 17/SC 19
Non-destructive testing of steel tubes — Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections — Amendment 2: Change acceptance criteria
60.60 ISO/TC 17/SC 19
Non-destructive testing of steel tubes — Part 4: Liquid penetrant inspection of seamless and welded steel tubes for the detection of surface imperfections
90.60 ISO/TC 17/SC 19
Non-destructive testing of steel tubes — Part 5: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections
90.60 ISO/TC 17/SC 19
Non-destructive testing of steel tubes — Part 6: Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections
95.99 ISO/TC 17/SC 19
Non-destructive testing of steel tubes — Part 6: Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections
90.60 ISO/TC 17/SC 19
Non-destructive testing of steel tubes — Part 7: Digital radiographic testing of the weld seam of welded steel tubes for the detection of imperfections
95.99 ISO/TC 17/SC 19
Non-destructive testing of steel tubes — Part 7: Digital radiographic testing of the weld seam of welded steel tubes for the detection of imperfections
90.60 ISO/TC 17/SC 19
Non-destructive testing of steel tubes — Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections
90.60 ISO/TC 17/SC 19
Non-destructive testing of steel tubes — Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections — Amendment 1: Change acceptance criteria
60.60 ISO/TC 17/SC 19
Non-destructive testing of steel tubes — Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes
90.60 ISO/TC 17/SC 19
Non-destructive testing of steel tubes — Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes — Amendment 1: Change acceptance criteria
60.60 ISO/TC 17/SC 19
Non-destructive testing of steel tubes — Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections
90.60 ISO/TC 17/SC 19
Non-destructive testing of steel tubes — Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections — Amendment 1: Change of ultrasonic test frequency; change of acceptance criteria
60.60 ISO/TC 17/SC 19
Non-destructive testing of steel tubes — Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections
90.60 ISO/TC 17/SC 19
Non-destructive testing of steel tubes — Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections — Amendment 1: Change of ultrasonic test frequency; change of acceptance criteria
60.60 ISO/TC 17/SC 19
Non-destructive testing of steel tubes — Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes
90.60 ISO/TC 17/SC 19
Non-destructive testing of steel tubes — Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes — Amendment 1: Change of acceptance criteria
60.60 ISO/TC 17/SC 19
Steel tubes for pressure purposes — Qualification and certification of non-destructive testing (NDT) personnel
95.99 ISO/TC 17/SC 19
Seamless and welded steel tubes for pressure purposes — Ultrasonic testing of tube ends for the detection of laminar imperfections
95.99 ISO/TC 17/SC 19
Welded steel tubes for pressure purposes — Ultrasonic testing for the detection of laminar imperfections in strips/plates used in the manufacture of welded tubes
95.99 ISO/TC 17/SC 19
Seamless and welded steel tubes for pressure purposes — Liquid penetrant testing
95.99 ISO/TC 17/SC 19
Submerged arc-welded steel tubes for pressure purposes — Radiographic testing of the weld seam for the detection of imperfections
95.99 ISO/TC 17/SC 19
Trenchless applications of ductile iron pipes systems — Product design and installation
90.92 ISO/TC 5/SC 2
Welded steel tubes for pressure purposes — Ultrasonic testing of the area adjacent to the weld seam for the detection of laminar imperfections
95.99 ISO/TC 17/SC 19
Seamless and welded steel tubes for pressure purposes — Magnetic particle inspection of the tube ends for the detection of laminar imperfections
95.99 ISO/TC 17/SC 19
Seamless and welded steel tubes for pressure purposes — Magnetic particle inspection of the tube body for the detection of surface imperfections
95.99 ISO/TC 17/SC 19
Ductile iron pipes and fittings — Seal coats for cement mortar linings
95.99 ISO/TC 5/SC 2
Ductile iron pipes and fittings — Seal coats for cement mortar linings
95.99 ISO/TC 5/SC 2
Ductile iron pipes and fittings — Seal coats for cement mortar linings
60.60 ISO/TC 5/SC 2
Earthquake- and subsidence-resistant design of ductile iron pipelines
95.99 ISO/TC 5/SC 2
Earthquake-resistant and subsidence-resistant design of ductile iron pipelines
60.60 ISO/TC 5/SC 2
Ductile iron fittings, accessories and their joints and valves — Epoxy coating
90.93 ISO/TC 5/SC 2
Construction and installation of ductile iron pipeline system
60.60 ISO/TC 5/SC 2
Restrained joint systems for ductile iron pipelines — Calculation rules for lengths to be restrained
60.60 ISO/TC 5/SC 2
Irrigation applications of ductile iron pipelines — Product design and installation
60.60 ISO/TC 5/SC 2
Internal protection by polymeric lining for ductile iron pipes — Requirements and test methods — Part 1: Polyurethane lining
60.60 ISO/TC 5/SC 2
Internal protection by polymeric lining for ductile iron pipes — Requirements and test methods — Part 2: Epoxy lining
60.60 ISO/TC 5/SC 2

По запросу ничего не найдено. Пожалуйста, попробуйте изменить настройки фильтра.