Textiles — Woven fabrics — Determination of dimensional change on commercial laundering near the boiling point

Textiles — Woven fabrics — Determination of dimensional change on commercial laundering near the boiling point — Technical Corrigendum 1

Textiles — Woven fabrics — Determination of dimensional change on commercial laundering near the boiling point

Textile fabrics — Determination of resistance to water penetration — Hydrostatic pressure test

Textiles — Determination of resistance to water penetration — Hydrostatic pressure test

Textiles — Determination of the recovery from creasing of a folded specimen of fabric by measuring the angle of recovery — Part 1: Method of the horizontally folded specimen

Textiles — Determination of the recovery from creasing of a folded specimen of fabric by measuring the angle of recovery — Part 2: Method of the vertically folded specimen

Textiles — Determination of the recovery from creasing of a horizontally folded specimen of fabric by measuring the angle of recovery

Wool — Determination of short-term irregularity of linear density of slivers, rovings and yarns, by means of an electronic evenness tester

Textiles — Woven fabric descriptions

Textiles — Woven fabric descriptions

Textiles — Determination of dimensional change of fabrics induced by free-steam

Textiles — Weaves — Definitions of general terms and basic weaves

Textiles — Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change

Textiles — Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change

Textiles — Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change

Textiles — Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change — Technical Corrigendum 1

Textiles — Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change — Technical Corrigendum 2

Textiles — Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change

Textiles — Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change

Textiles — Woven fabrics — Determination of mass per unit length and mass per unit area

Textiles — Woven fabrics — Measurement of width of pieces

Textiles — Woven fabrics — Measurement of length of pieces

Textiles — Determination of resistance to surface wetting (spray test) of fabrics

Textile fabrics — Determination of resistance to surface wetting (spray test)

Textiles — Woven fabrics — Determination of breaking strength and elongation (Strip method)

Textiles — Woven fabrics — Determination of breaking strength — Grab method

Textiles — Determination of thickness of woven and knitted fabrics (other than textile floor coverings)

Textiles — Determination of thickness of textiles and textile products

Textile fabrics — Burning behaviour — Determination of ease of ignition of vertically oriented specimens

Textile fabrics — Burning behaviour — Determination of ease of ignition of vertically oriented specimens — Amendment 1

Textile fabrics — Burning behaviour — Determination of ease of ignition of vertically oriented specimens

Textile fabrics — Burning behaviour — Measurement of flame spread properties of vertically oriented specimens

Textile fabrics — Burning behaviour — Measurement of flame spread properties of vertically oriented specimens — Amendment 1

Textile fabrics — Burning behaviour — Measurement of flame spread properties of vertically oriented specimens

Textiles — Woven fabrics — Construction — Methods of analysis — Part 1: Methods for the presentation of a weave diagram and plans for drafting, denting and lifting

Textiles — Woven fabrics — Construction — Methods of analysis — Part 2: Determination of number of threads per unit length

Textiles — Woven fabrics — Construction — Methods of analysis — Part 2: Determination of number of threads per unit length

Textiles — Woven fabrics — Construction — Methods of analysis — Part 3: Determination of crimp of yarn in fabric

Textiles — Woven fabrics — Construction — Methods of analysis — Part 4: Determination of twist in yarn removed from fabric

Textiles — Woven fabrics - Construction - Methods of analysis — Part 5: Determination of linear density of yarn removed from fabric

Textiles — Methods for analysis of woven fabrics construction — Part 5: Determination of linear density of yarn removed from fabric

Textiles — Woven fabrics — Construction — Methods of analysis — Part 6: Determination of the mass of warp and weft per unit area of fabric

Textiles — Methods for analysis of woven fabrics construction — Part 6: Determination of the mass of warp and weft per unit area of fabric

Textiles — Method for assessing the appearance of durable press fabrics after domestic washing and drying

Textiles — Test method for assessing the smoothness appearance of fabrics after cleansing

Textiles — Test method for assessing the smoothness appearance of fabrics after cleansing

Textiles — Method for assessing the appearance of creases in durable-press products after domestic washing and drying

Textiles — Test method for assessing the appearance of creases in fabrics after cleansing

Textiles — Test method for assessing the appearance of creases in fabrics after cleansing

Textiles — Test method for assessing the smoothness appearance of seams in fabrics after cleansing

Textiles — Test method for assessing the smoothness appearance of seams in fabrics after cleansing

Textiles — Determination of dimensional changes of fabrics induced by cold-water immersion

Knitted fabrics — Types — Vocabulary

Woven fabrics — Description of defects — Vocabulary

Knitted fabrics — Description of defects — Vocabulary

Knitted fabrics — Description of defects — Vocabulary

Textiles — Test methods for nonwovens — Part 1: Determination of mass per unit area

Nonwovens — Test methods — Part 1: Determination of mass per unit area

Textiles — Test methods for nonwovens — Part 2: Determination of thickness

Textiles — Test methods for nonwovens — Part 2: Determination of thickness

Textiles — Test methods for nonwovens — Part 2: Determination of thickness — Technical Corrigendum 1

Textiles — Test methods for nonwovens — Part 3: Determination of tensile strength and elongation

Nonwovens — Test methods — Part 3: Determination of tensile strength and elongation at break using the strip method

Textiles — Test methods for nonwovens — Part 4: Determination of tear resistance

Textiles — Test methods for nonwovens — Part 4: Determination of tear resistance

Nonwovens — Test methods — Part 4: Determination of tear resistance by the trapezoid procedure

Textiles — Test methods for nonwovens — Part 5: Determination of resistance to mechanical penetration (ball burst procedure)

Textiles — Test methods for nonwovens — Part 6: Absorption

Textiles — Test methods for nonwovens — Part 7: Determination of bending length

Textiles — Test methods for nonwovens — Part 8: Determination of liquid strike-through time (simulated urine)

Textiles — Test methods for nonwovens — Part 9: Determination of drape coefficient

Textiles — Test methods for nonwovens — Part 9: Determination of drapability including drape coefficient

Textiles — Test methods for nonwovens — Part 10: Lint and other particles generation in the dry state

Textiles — Test methods for nonwovens — Part 11: Run-off

Textiles — Test methods for nonwovens — Part 12: Demand absorbency

Textiles — Test methods for nonwovens — Part 13: Repeated liquid strike-through time

Nonwovens — Test methods — Part 13: Repeated liquid strike-through time (simulated urine)

Textiles — Test methods for nonwovens — Part 14: Coverstock wetback

Nonwovens — Test methods — Part 14: Coverstock wetback (simulated urine)

Textiles — Test methods for nonwovens — Part 15: Determination of air permeability

Textiles — Test methods for nonwovens — Part 16: Determination of resistance to penetration by water (hydrostatic pressure)

Textiles — Test methods for nonwovens — Part 17: Determination of water penetration (spray impact)

Textiles — Test methods for nonwovens — Part 18: Determination of breaking strength and elongation of nonwoven materials using the grab tensile test

Nonwovens — Test methods — Part 18: Determination of tensile strength and elongation at break using the grab tensile test

Textiles — Nonwovens — Definition

Textiles — Nonwovens — Definition

Nonwovens — Vocabulary

Textiles — Determination of the permeability of fabrics to air

Textiles — Woven fabrics — Determination of tear resistance by the falling pendulum method

Textiles — Weaves — Coding system and examples

Textiles — Weaves — Coding system and examples — Technical Corrigendum 1

Textiles — Determination of water repellency of fabrics by the Bundesmann rain-shower test

Textiles — Effect of dry heat on fabrics under low pressure — Part 1: Procedure for dry-heat treatment of fabrics

Textiles — Effect of dry heat on fabrics under low pressure — Part 2: Determination of dimensional change in fabrics exposed to dry heat

Textiles — Evaluation of the wrinkle recovery of fabrics — Appearance method

Textiles — Evaluation of the wrinkle recovery of fabrics — Appearance method

Textiles — Evaluation of the wrinkle recovery of fabrics — Appearance method

Textiles — Determination of surface burning time of fabrics

Textiles — Fabrics for awnings and camping tents — Specification

Sports and recreational equipment — Fabrics for awnings and camping tents — Specification

Sports and recreational equipment — Fabrics for awnings — Specification

Textiles — Nonwovens — Web formation and bonding — Vocabulary

Textiles — Web formation and bonding in nonwovens — Vocabulary

Textiles — Domestic laundering procedures for textile fabrics prior to flammability testing

Textiles — Domestic laundering procedures for textile fabrics prior to flammability testing

Textiles — Determination of the abrasion resistance of fabrics by the Martindale method — Part 1: Martindale abrasion testing apparatus

Textiles — Determination of the abrasion resistance of fabrics by the Martindale method — Part 1: Martindale abrasion testing apparatus — Technical Corrigendum 1

Textiles — Determination of the abrasion resistance of fabrics by the Martindale method — Part 2: Determination of specimen breakdown

Textiles — Determination of the abrasion resistance of fabrics by the Martindale method — Part 2: Determination of specimen breakdown — Technical Corrigendum 1

Textiles — Determination of the abrasion resistance of fabrics by the Martindale method — Part 2: Determination of specimen breakdown

Textiles — Determination of the abrasion resistance of fabrics by the Martindale method — Part 3: Determination of mass loss

Textiles — Determination of the abrasion resistance of fabrics by the Martindale method — Part 3: Determination of mass loss — Technical Corrigendum 1

Textiles — Determination of the abrasion resistance of fabrics by the Martindale method — Part 4: Assessment of appearance change

Textiles — Determination of the abrasion resistance of fabrics by the Martindale method — Part 4: Assessment of appearance change — Technical Corrigendum 1

Woven fabrics — Distortion — Determination of skew and bow

Textiles — Tensile properties of fabrics — Part 1: Determination of maximum force and elongation at maximum force using the strip method

Textiles — Tensile properties of fabrics — Part 1: Determination of maximum force and elongation at maximum force using the strip method

Textiles — Tensile properties of fabrics — Part 2: Determination of maximum force using the grab method

Textiles — Tensile properties of fabrics — Part 2: Determination of maximum force using the grab method

Textiles — Seam tensile properties of fabrics and made-up textile articles — Part 1: Determination of maximum force to seam rupture using the strip method

Textiles — Seam tensile properties of fabrics and made-up textile articles — Part 1: Determination of maximum force to seam rupture using the strip method

Textiles — Seam tensile properties of fabrics and made-up textile articles — Part 2: Determination of maximum force to seam rupture using the grab method

Textiles — Seam tensile properties of fabrics and made-up textile articles — Part 2: Determination of maximum force to seam rupture using the grab method

Textiles — Determination of the slippage resistance of yarns at a seam in woven fabrics — Part 1: Fixed seam opening method

Textiles — Determination of the slippage resistance of yarns at a seam in woven fabrics — Part 2: Fixed load method

Textiles — Determination of the slippage resistance of yarns at a seam in woven fabrics — Part 3: Needle clamp method

Textiles — Tear properties of fabrics — Part 1: Determination of tear force using ballistic pendulum method (Elmendorf)

Textiles — Tear properties of fabrics — Part 1: Determination of tear force using ballistic pendulum method (Elmendorf) — Technical Corrigendum 1

Textiles — Tear properties of fabrics — Part 2: Determination of tear force of trouser-shaped test specimens (Single tear method)

Textiles — Tear properties of fabrics — Part 3: Determination of tear force of wing-shaped test specimens (Single tear method)

Textiles — Tear properties of fabrics — Part 4: Determination of tear force of tongue-shaped test specimens (Double tear test)

Textiles — Bursting properties of fabrics — Part 1: Hydraulic method for determination of bursting strength and bursting distension

Textiles — Bursting properties of fabrics — Part 1: Hydraulic method for determination of bursting strength and bursting distension

Textiles — Bursting properties of fabrics — Part 2: Pneumatic method for determination of bursting strength and bursting distension

Textiles — Bursting properties of fabrics — Part 2: Pneumatic method for determination of bursting strength and bursting distension

Textiles — Test method for assessing the matting appearance of napped fabrics after cleansing

Textiles — Bare elastane yarns — Determination of resistance to chlorinated water (swimming-pool water)

Textiles — Test methods for evaluating the electrostatic propensity of fabrics — Part 1: Test method using corona charging

Textiles — Test methods for evaluating the electrostatic propensity of fabrics — Part 2: Test method using rotary mechanical friction

Textiles — Test methods for evaluating the electrostatic propensity of fabrics — Part 3: Test method using manual friction

Textiles — Test methods for evaluating the electrostatic propensity of fabrics — Part 4: Test method using horizontal mechanical friction

Superfine woven wool fabric labelling — Requirements for Super S code definition

Textiles — Determination of water absorption time and water absorption capacity of textile fabrics

Textiles — Determination of the elasticity of fabrics — Part 1: Strip tests

Textiles — Determination of the elasticity of fabrics — Part 1: Strip tests — Amendment 1

Textiles — Determination of the elasticity of fabrics — Part 2: Multiaxial tests

Textiles — Determination of the elasticity of fabrics — Part 3: Narrow fabrics

Textiles — Determination of fabric deformability by forced mechanical distension

Textiles — Fabrics — Determination of width and length

Textiles — Determination of dimensional change of fabrics — Accelerated machine method

Textiles — Knitted fabrics — Representation and pattern design

Textiles — Biaxial tensile properties of woven fabric — Determination of maximum force and elongation at maximum force using the grab method

Textiles and textile products — Guidelines on the determination of the precision of a standard test method by interlaboratory trials