Подкомитет | Заголовок подкомитета | Опубликованные стандарты | Стандарты, находящиеся на стадии разработки |
---|---|---|---|
ISO/TC 29/SC 5 | Grinding wheels and abrasives | 61 | 0 |
ISO/TC 29/SC 8 | Tools for pressing and moulding | 70 | 6 |
ISO/TC 29/SC 9 | Tools with defined cutting edges, holding tools, cutting items, adaptive items and interfaces | 219 | 2 |
ISO/TC 29/SC 10 | Assembly tools for screws and nuts, pliers and nippers | 55 | 3 |
Фильтр :
Стандарт и/или проект находящийся в компетенции ISO/TC 29 Секретариата | Этап | ICS |
---|---|---|
Files and rasps — Part 1: Dimensions
|
90.93 | |
Files and rasps — Part 2: Characteristics of cut
|
90.93 | |
Withdrawal of ISO 234-1975
|
95.99 | |
Withdrawal of ISO 235/1-1975
|
95.99 | |
Withdrawal of ISO 235/2-1972
|
95.99 | |
Long fluted machine reamers, Morse taper shanks
|
95.99 | |
Reduction sleeves and extension sockets for tools with Morse taper shanks
|
95.99 | |
Drill chuck tapers
|
95.99 | |
Milling cutters — Interchangeability dimensions for cutter arbors or cutter mandrels — Metric series and inch series
|
95.99 | |
Milling cutters — Recommended range of outside diameters
|
95.99 | |
Withdrawal of ISO/R 524-1966
|
95.99 | |
Bonded abrasive products — General features — Designation, ranges of dimensions, and profiles
|
95.99 | |
Short machine taps and hand taps
|
95.99 | |
Short machine taps and hand taps — Amendment 1
|
95.99 | |
Short machine taps and hand taps — Amendment 2
|
95.99 | |
Machine tools — Mounting of plain grinding wheels by means of hub flanges
|
95.99 | |
Milling machine arbors with 7/24 tapers — Part 1: Dimensions
|
95.99 | |
Indexable (throwaway) carbide inserts without fixation hole — Dimensions
|
95.99 | |
Combinations of double-ended wrench gaps
|
95.99 | |
Assembly tools for bolts and screws — Hexagon drive ends for power tools
|
95.99 | |
Assembly tools for bolts and screws — Driving squares for power socket wrenches and hand socket wrenches — Amendment 1
|
95.99 | |
Shanks for pneumatic tools and fitting dimensions of chuck bushings
|
90.93 | |
Shanks for pneumatic tools and fitting dimensions of chuck bushings — Addendum 1
|
60.60 | |
Withdrawal of ISO/R 1571-1970
|
95.99 | |
End mills and slot drills — Part 1: Milling cutters with parallel shanks
|
95.99 | |
End mills and slot drills — Part 3: Milling cutters with 7/24 taper shanks
|
95.99 | |
Tube drawing mandrels
|
90.60 | |
Tube drawing mandrels — Amendment 1
|
60.60 | |
Wire, bar and tube drawing dies — Specifications
|
90.93 | |
Wire, bar and tube drawing dies — Specifications — Amendment 2
|
60.60 | |
Hand operated wrenches and sockets — Technical specifications — Amendment 1
|
95.99 | |
Assembly tools for screws and nuts — Forged and tubular socket wrenches — Maximum outside head dimensions
|
95.99 | |
Long shank machine taps with nominal diameters from 3 to 24 mm and 1/8 to 1 in
|
95.99 | |
Long shank machine taps with nominal diameters from 3 to 24 mm and 1/8 to 1 in — Amendment 1
|
95.99 | |
Hand taps for pipe threads for parallel and taper threads — General dimensions and marking
|
95.99 | |
Withdrawal of ISO 2324-1972
|
95.99 | |
Hacksaw blades — Part 1: Dimensions for hand blades
|
90.93 | |
Hacksaw blades — Part 2: Dimensions for machine blades
|
95.99 | |
Hand and machine hacksaw blades — Dimensions for lengths up to 450 mm and pitches up to 6,3 mm
|
95.99 | |
Screwdriver bits, for slotted head screws, with male hexagon drive
|
95.99 | |
Truncated cone abrasive sleeves — Designation — Dimensions — Tolerances
|
95.99 | |
Truncated cone abrasive sleeves — Designation — Dimensions — Tolerances — Addendum 1
|
95.99 | |
Hand- and machine-operated circular screwing dies and hand-operated die stocks
|
95.99 | |
Hand- and machine-operated circular screwing dies and hand-operated die stocks — Amendment 1
|
95.99 | |
Hand- and machine-operated circular screwing dies and hand-operated die stocks — Amendment 2
|
95.99 | |
Tool shanks and equipment with 7/24 tapers — Collar dimensions
|
95.99 | |
Shell end mills with plain bore and tenon drive — Metric series
|
95.99 | |
Assembly tools for screws and nuts — Power and hand operated square drive sockets — Metric series
|
95.99 | |
Woodworking tools — Metal bodied planes
|
95.99 | |
Woodworking tools — Plane irons
|
95.99 | |
Woodworking tools — Chisels and gouges
|
95.99 | |
Woodworking tools — Chisels and gouges
|
90.93 | |
Woodworking tools — Wooden bodied planes
|
95.99 | |
Milling cutters with tenon drive — Interchangeability dimensions with cutter arbors — Metric series
|
95.99 | |
Milling cutters with tenon drive — Interchangeability dimensions with cutter arbors — Metric series
|
95.99 | |
Wire, bar or tube drawing dies — As sintered pellets of hard metal (carbide) — Dimensions
|
95.99 | |
Wire, bar or tube drawing dies — As-sintered pellets of hardmetal (carbide) — Dimensions
|
90.93 | |
Basic quantities in cutting and grinding — Part 1: Geometry of the active part of cutting tools — General terms, reference systems, tool and working angles, chip breakers
|
90.93 | |
Basic quantities in cutting and grinding — Part 1: Geometry of the active part of cutting tools — General terms, reference systems, tool and working angles, chip breakers — Amendment 1
|
60.60 | |
Basic quantities in cutting and grinding — Part 2: Geometry of the active part of cutting tools — General conversion formulae to relate tool and working angles
|
90.93 | |
Basic quantities in cutting and grinding — Part 3: Geometric and kinematic quantities in cutting
|
90.93 | |
Basic quantities in cutting and grinding — Part 4: Forces, energy, power
|
90.93 | |
Basic quantities in cutting and grinding — Part 5: Basic terminology for grinding processes using grinding wheels
|
90.93 | |
Assembly tools for screws and nuts — Hexagon insert bits for hexagon socket head screws
|
95.99 | |
Extra long Morse taper shank twist drills
|
95.99 | |
Extra long parallel shank twist drills
|
95.99 | |
Assembly tools for screws and nuts — Driving parts for hand-operated square drive socket wrenches — Torque testing
|
95.99 | |
Assembly tools for screws and nuts — Attachments for hand-operated square drive socket wrenches — Torque testing
|
95.99 | |
Assembly tools for screws and nuts — Open-end double-head engineers' wrenches, double-head box wrenches and combination wrenches — Maximum widths of heads
|
95.99 | |
T-slot cutters with plain or flatted parallel shanks and with Morse taper shanks having tapped hole — Metric series
|
95.99 | |
Parallel shanks for milling cutters — Part 1: Dimensional characteristics of plain parallel shanks
|
95.99 | |
Parallel shanks for milling cutters — Part 1: Dimensional characteristics of plain parallel shanks
|
95.99 | |
Parallel shanks for milling cutters — Part 2: Dimensional characteristics of flatted parallel shanks
|
95.99 | |
Parallel shanks for milling cutters — Part 2: Dimensional characteristics of flatted parallel shanks
|
95.99 | |
Cylindrical shanks for milling cutters — Part 2: Dimensional characteristics of flatted cylindrical shanks
|
95.99 | |
Cylindrical shanks for milling cutters — Part 2: Dimensional characteristics of flatted cylindrical shanks
|
95.99 | |
Cylindrical shanks for milling cutters — Part 2: Dimensional characteristics of flatted cylindrical shanks
|
95.99 | |
Indexable (throwaway) carbide inserts with cylindrical fixation hole — Dimensions
|
95.99 | |
Indexable (throwaway) carbide inserts for milling cutters — Dimensions — Part 1: Square inserts
|
95.99 | |
Indexable (throwaway) hardmetal inserts for milling cutters — Dimensions — Part 2: Triangular inserts
|
95.99 | |
Subland twist drills with Morse taper shanks for holes prior to tapping screw threads
|
95.99 | |
Subland twist drills with parallel shanks for holes prior to tapping screw threads
|
95.99 | |
Tool-life testing with single-point turning tools
|
95.99 | |
Inverse dovetail cutters and dovetail cutters with parallel shanks
|
95.99 | |
Inverse dovetail cutters and dovetail cutters with parallel shanks
|
95.99 | |
Coated abrasives — Flap wheels with shafts — Designation and dimensions
|
95.99 | |
Reduction sleeves with tenon drive with external and internal 7/24 taper — Dimensions
|
95.99 | |
Cutter arbors with tenon drive — Dimensions
|
95.99 | |
Cutter arbors with tenon drive — Dimensions
|
95.99 | |
Reduction sleeves with external 7/24 taper for tools with Morse taper shanks
|
95.99 | |
Countersinks, 90 degrees, with parallel shanks and solid pilot
|
95.99 | |
Counterbores with parallel shanks and solid pilots
|
95.99 | |
Hand- and machine-operated circular screwing dies for taper pipe threads — R series
|
95.99 | |
Hand- and machine-operated circular screwing dies for parallel pipe threads — G series
|
95.99 | |
Jig bushes and accessories for drilling purposes — Dimensions
|
95.99 | |
Metal cutting band saw blades — Part 3: Characteristics relating to each type of blade
|
95.99 | |
Machine tools — Positive drive of Morse tapers
|
95.99 | |
Tool chucks (end mill holders) with clamp screws for flatted parallel shank tools — Part 1: Dimensions of the driving system of tool shanks
|
95.99 | |
Tool chucks (end mill holders) with clamp screws for flatted parallel shank tools — Part 1: Dimensions of the driving system of tool shanks
|
95.99 | |
Tool chucks (end mill holders) with clamp screws for flatted parallel shank tools — Part 2: Connecting dimensions of chucks
|
95.99 | |
Reduction sleeves with 7/24 external and Morse internal taper and incorporated screw
|
95.99 | |
Rotary percussive masonry drills with hardmetal tips — Dimensions
|
95.99 | |
Rotary and rotary impact masonry drill bits with hardmetal tips — Dimensions
|
95.99 | |
Turning and copying tool holders and cartridges for indexable (throwaway) inserts — Designation
|
95.99 | |
Cartridges, type A, for indexable inserts — Dimensions
|
95.99 | |
Pliers and nippers — Nomenclature — Addendum 1
|
95.99 | |
Pliers and nippers — General technical requirements
|
95.99 | |
Pliers and nippers — Methods of test
|
95.99 | |
Pliers and nippers — Pliers for gripping and manipulating — Dimensions
|
95.99 | |
Pliers and nippers — Engineer's and lineman's pliers — Dimensions
|
95.99 | |
Pliers and nippers — Lever assisted side cutting pliers, end and diagonal cutting nippers — Dimensions
|
95.99 | |
Pliers and nippers — End cutting nippers — Dimensions
|
95.99 | |
Pliers and nippers — End cutting nippers — Dimensions — Addendum 1
|
95.99 | |
Pliers and nippers — Diagonal cutting nippers — Dimensions
|
95.99 | |
Pliers and nippers — Diagonal cutting nippers — Dimensions — Addendum 1
|
95.99 | |
Ejector pins with cylindrical head — Basic dimensions
|
95.99 | |
Dimensions of hexagonal dienuts
|
95.99 | |
Tool shanks with 7/24 taper for automatic tool changers — Part 1: Shanks Nos. 40, 45 and 50 — Dimensions — Addendum 1: Conicity tolerances
|
95.99 | |
Tool shanks with 7/24 taper for automatic tool changers — Part 3: Retention knobs for shanks of forms AC, AD, AF, UC, UD, UF, JD and JF
|
95.99 | |
Long shank taps with nominal diameters from M3 to M10 — Taps with reinforced shank and recess
|
95.99 | |
7/24 tapers for tool shanks for automatic changing — Tapers for spindle noses
|
95.99 | |
Cutter arbors with parallel key and tenon drive — Part 1: General dimensions
|
95.99 | |
Cutter arbors with parallel key and tenon drive — Part 2: Dimensions and designation of tool holders with hollow taper interface with flange contact surface
|
95.99 | |
Cutter arbors with parallel key and tenon drive — Part 3: Dimensions and designation of tool holders with 7/24 taper for automatic tool changers
|
95.99 | |
Cutter arbors with parallel key and tenon drive — Part 4: Dimensions and designation of tool holders with 7/24 taper without automatic tool changers
|
95.99 | |
Tool holders with cylindrical shank — Part 1: Cylindrical shank, location bore — Technical delivery conditions
|
95.99 | |
Tool holders with cylindrical shank — Part 2: Type A, shanks for tool holders of special designs
|
95.99 | |
Tool holders with cylindrical shank — Part 2: Type A, shanks for tool holders of special designs
|
95.99 | |
Tool holders with cylindrical shank — Part 3: Type B with rectangular radial seat
|
95.99 | |
Tool holders with cylindrical shank — Part 3: Type B with rectangular radial seat
|
95.99 | |
Tool holders with cylindrical shank — Part 4: Type C with rectangular axial seat
|
95.99 | |
Tool holders with cylindrical shank — Part 4: Type C with rectangular axial seat
|
95.99 | |
Tool holders with cylindrical shank — Part 5: Type D with more than one rectangular seat
|
95.99 | |
Tool holders with cylindrical shank — Part 6: Type E with cylindrical seat
|
95.99 | |
Tool holders with cylindrical shank — Part 6: Type E with cylindrical seat
|
95.99 | |
Tool holders with cylindrical shank — Part 7: Type F with taper seat
|
95.99 | |
Tool holders with cylindrical shank — Part 7: Type F with taper seat
|
95.99 | |
Collets for tool holders with taper ratio 1:10 — Collets, hoders,nuts
|
95.99 | |
Hollow taper interface with flange contact surface — Part 3: Dimensions of shanks for stationary tools
|
95.99 | |
Hollow taper interface with flange contact surface — Part 4: Dimensions of receivers for stationary tools
|
95.99 | |
Cutting tool data representation and exchange — Part 1: Overview, fundamental principles and general information model
|
90.93 | |
Cutting tool data representation and exchange — Part 1: Overview, fundamental principles and general information model — Amendment 1
|
60.60 | |
Cutting tool data representation and exchange — Part 1: Overview, fundamental principles and general information model — Technical Corrigendum 1
|
60.60 | |
Cutting tool data representation and exchange — Part 1: Overview, fundamental principles and general information model — Technical Corrigendum 2
|
60.60 | |
Cutting tool data representation and exchange — Part 2: Reference dictionary for the cutting items
|
95.99 | |
Cutting tool data representation and exchange — Part 2: Reference dictionary for the cutting items — Technical Corrigendum 1
|
95.99 | |
Cutting tool data representation and exchange — Part 2: Reference dictionary for the cutting items
|
95.99 | |
Cutting tool data representation and exchange — Part 2: Reference dictionary for the cutting items
|
90.20 | |
Cutting tool data representation and exchange — Part 3: Reference dictionary for tool items
|
95.99 | |
Cutting tool data representation and exchange — Part 3: Reference dictionary for tool items — Technical Corrigendum 1
|
95.99 | |
Cutting tool data representation and exchange — Part 3: Reference dictionary for tool items
|
95.99 | |
Cutting tool data representation and exchange — Part 3: Reference dictionary for tool items
|
90.20 | |
Cutting tool data representation and exchange — Part 4: Reference dictionary for adaptive items
|
95.99 | |
Cutting tool data representation and exchange — Part 4: Reference dictionary for adaptive items — Technical Corrigendum 1
|
95.99 | |
Cutting tool data representation and exchange — Part 4: Reference dictionary for adaptive items
|
95.99 | |
Cutting tool data representation and exchange — Part 4: Reference dictionary for adaptive items
|
90.20 | |
Cutting tool data representation and exchange — Part 5: Reference dictionary for assembly items
|
95.99 | |
Cutting tool data representation and exchange — Part 5: Reference dictionary for assembly items — Technical Corrigendum 1
|
95.99 | |
Cutting tool data representation and exchange — Part 5: Reference dictionary for assembly items
|
90.93 | |
Cutting tool data representation and exchange — Part 6: Assembly of cutting tool components
|
20.00 |
|
Cutting tool data representation and exchange — Part 50: Reference dictionary for reference systems and common concepts
|
95.99 | |
Cutting tool data representation and exchange — Part 50: Reference dictionary for reference systems and common concepts — Technical Corrigendum 1
|
95.99 | |
Cutting tool data representation and exchange — Part 50: Reference dictionary for reference systems and common concepts
|
90.93 | |
Cutting tool data representation and exchange — Part 60: Reference dictionary for connection systems
|
95.99 | |
Cutting tool data representation and exchange — Part 60: Reference dictionary for connection systems — Technical Corrigendum 1
|
95.99 | |
Cutting tool data representation and exchange — Part 60: Reference dictionary for connection systems
|
90.60 | |
Cutting tool data representation and exchange — Part 61: Company codes
|
20.00 |
|
Cutting tool data representation and exchange — Part 70: Graphical data layout — Layer setting for tool layout
|
90.93 | |
Cutting tool data representation and exchange — Part 71: Graphical data layout — Creation of documents for standardized data exchange: Graphical product information
|
90.93 | |
Cutting tool data representation and exchange — Part 72: Creation of documents for the standardized data exchange — Definition of properties for drawing header and their XML-data exchange
|
90.93 | |
Cutting tool data representation and exchange — Part 80: Creation and exchange of 3D models — Overview and principles
|
95.99 | |
Cutting tool data representation and exchange — Part 80: Creation and exchange of 3D models — Overview and principles
|
90.93 | |
Cutting tool data representation and exchange — Part 90: Container file for exchange of properties, data and 3D models
|
10.99 |
|
Cutting tool data representation and exchange — Part 100: Definitions, principles and methods for reference dictionaries
|
95.99 | |
Cutting tool data representation and exchange — Part 100: Definitions, principles and methods for reference dictionaries
|
90.93 | |
Cutting tool data representation and exchange — Part 100: Definitions, principles and methods for reference dictionaries — Technical Corrigendum 1
|
60.60 | |
Cutting tool data representation and exchange — Part 150: Usage guidelines
|
90.93 | |
Cutting tool data representation and exchange — Part 201: Creation and exchange of 3D models — Regular inserts
|
90.20 | |
Cutting tool data representation and exchange — Part 202: Creation and exchange of 3D models — Irregular inserts
|
90.93 | |
Cutting tool data representation and exchange — Part 203: Creation and exchange of 3D models — Replaceable inserts for drilling
|
90.93 | |
Cutting tool data representation and exchange — Part 204: Creation and exchange of 3D models — Inserts for reaming
|
90.93 | |
Cutting tool data representation and exchange — Part 301: Concept for the design of 3D models based on properties according to ISO/TS 13399-3: Modelling of thread-cutting taps, thread-forming taps and thread-cutting dies
|
90.93 | |
Cutting tool data representation and exchange — Part 302: Concept for the design of 3D models based on properties according to ISO/TS 13399-3: Modelling of solid drills and countersinking tools
|
90.93 | |
Cutting tool data representation and exchange — Part 303: Creation and exchange of 3D models — Solid end mills
|
90.93 | |
Cutting tool data representation and exchange — Part 304: Creation and exchange of 3D models — Solid milling cutters with arbor hole
|
90.93 | |
Cutting tool data representation and exchange — Part 305: Creation and exchange of 3D models — Modular tooling systems with adjustable cartridges for boring
|
90.93 | |
Cutting tool data representation and exchange — Part 306: Creation and exchange of 3D models — Drills and countersinking tools for indexable inserts
|
90.20 | |
Cutting tool data representation and exchange — Part 307: Creation and exchange of 3D models — End mills for indexable inserts
|
90.93 | |
Cutting tool data representation and exchange — Part 308: Creation and exchange of 3D models — Milling cutters with arbor hole for indexable inserts
|
90.93 | |
Cutting tool data representation and exchange — Part 309: Creation and exchange of 3D models — Tool holders for indexable inserts
|
90.93 | |
Cutting tool data representation and exchange — Part 310: Creation and exchange of 3D models — Turning tools with carbide tips
|
90.93 | |
Cutting tool data representation and exchange — Part 311: Creation and exchange of 3D models — Solid reamers
|
90.93 | |
Cutting tool data representation and exchange — Part 312: Creation and exchange of 3D models — Reamers for indexable inserts
|
90.93 | |
Cutting tool data representation and exchange — Part 313: Creation and exchange of 3D models — Burrs
|
90.93 | |
Cutting tool data representation and exchange — Part 314: Creation and exchange of 3D models — Cartridges for indexable inserts
|
90.20 | |
Cutting tool data representation and exchange — Part 315: Creation and exchange of 3D models — Modelling of machine operated feed out tools
|
90.93 | |
Cutting tool data representation and exchange — Part 401: Creation and exchange of 3D models — Converting, extending and reducing adaptive items
|
90.93 | |
Cutting tool data representation and exchange — Part 403: Creation and exchange of 3D models — Modelling of driven tool units
|
90.93 | |
Cutting tool data representation and exchange — Part 405: Creation and exchange of 3D models — Collets
|
90.93 | |
Cutting tool data representation and exchange — Part 406: Creation and exchange of 3D models — Modelling of connection interface
|
90.93 | |
Collets with 8 degree setting angle for tool shanks — Collets, nuts and fitting dimensions
|
95.99 | |
Balancing of rotating tools and tool systems
|
90.93 | |
Modular taper interface with ball track system — Part 1: Dimensions and designation of shanks
|
95.99 | |
Modular taper interface with ball track system — Part 1: Dimensions and designation of shanks
|
90.93 | |
Polygonal taper interface with flange contact surface — Part 1: Dimensions and designation of shanks
|
95.99 | |
Polygonal taper interface with flange contact surface — Part 2: Dimensions and designation of receivers
|
95.99 |
По запросу ничего не найдено. Пожалуйста, попробуйте изменить настройки фильтра.