Тезис
This part of ISO 13373 provides general guidelines for the measurement and data collection functions of machinery
vibration for condition monitoring. It is intended to promote consistency of measurement procedures and practices,
which usually concentrate on rotating machines.
Because of the diversity of approaches to condition monitoring, recommendations specific to a particular kind of
monitoring programme will be addressed in additional parts of ISO 13373.
This part of ISO 13373 is a basic document which presents recommendations of a general nature, encompassing
measurement methods,
measurement parameters,
transducer selection,
transducer location,
transducer attachment,
data collection,
machine operating conditions,
vibration monitoring systems,
signal conditioning systems,
interfaces with data-processing systems,
continuous monitoring, and
periodic monitoring.
The vibratory conditions of a machine can be monitored by vibration measurements on the bearing or housing
structure and/or by vibration measurements of the rotating elements of the machine. In addition, measurements
can be continuous or non-continuous. This part of ISO 13373 provides guidance on the types of measurements
recommended in both the continuous and the non-continuous modes.
It is emphasized that this part of ISO 13373 addresses only the procedures for vibration condition monitoring of
machines. In many cases, the complete condition monitoring and diagnostics of a machine can also include other
parameters, such as thermography, oil analysis, ferrography, process variations, temperatures and pressures.
These non-vibratory parameters will be included in other International Standards.
This part of ISO 13373 covers rotating machines. However, many of the procedures included can be applied to
other types of machines, for example reciprocating machines.
Preview
Общая информация
-
Текущий статус: ОпубликованоДата публикации: 2002-02Этап: Рассылка краткого отчета о пересмотре [90.60]
-
Версия: 1
-
Технический комитет :ISO/TC 108/SC 2ICS :17.160
- RSS обновления
Жизненный цикл
-
Сейчас
ОпубликованоISO 13373-1:2002
Стандарт, который пересматривается каждые 5 лет
Этап: 90.60 (Hа стадии пересмотра)-
00
Предварительная стадия
-
10
Стадия, связанная с внесением предложения
-
20
Подготовительная стадия
-
30
Стадия, связанная с подготовкой проекта комитета
-
40
Стадия, связанная с рассмотрением проекта международного стандарта
-
50
Стадия, на которой осуществляется принятие стандарта
-
60
Стадия, на которой осуществляется публикация
-
90
Стадия пересмотра
-
95
Стадия, на которой осуществляется отмена стандарта
-
00
Появились вопросы?
Ознакомьтесь с FAQ
Часы работы:
Понедельник – пятница: 09:00-12:00, 14:00-17:00 (UTC+1)