недоступно на русском языке

Тезис

 Preview

ISO 10426-1:2009 specifies requirements and gives recommendations for six classes of well cements, including their chemical and physical requirements and procedures for physical testing.

ISO 10426-1:2009 is applicable to well cement classes A, B, C and D, which are the products obtained by grinding Portland cement clinker and, if needed, calcium sulfate as an interground additive. Processing additives can be used in the manufacture of cement of these classes. Suitable set-modifying agents can be interground or blended during manufacture of class D cement.

ISO 10426-1:2009 is also applicable to well cement classes G and H, which are the products obtained by grinding clinker with no additives other than one or more forms of calcium sulfate, water or chemical additives as required for chromium (VI) reduction.


Общая информация 

  • Текущий статус
     : Опубликовано
    Дата публикации
     : 2009-12
  • Версия
     : 3
  • Технический комитет
     : ISO/TC 67/SC 3 Drilling and completion fluids, well cements and treatment fluids
  • ICS
     :
    75.020 Extraction and processing of petroleum and natural gas
    91.100.10 Cement. Gypsum. Lime. Mortar

Приобрести данный стандарт

Формат Язык
PDF
Бумажный
  • CHF166

Жизненный цикл

Появились вопросы?

Ознакомьтесь с FAQ

Работа с клиентами
+41 22 749 08 88

Часы работы:
Понедельник – пятница: 09:00-12:00, 14:00-17:00 (UTC+1)

  2. Интернет-магазин
  3. Каталог стандартов
  4. МКС
  5. 75
  6. 75.020
  7. ISO 10426-1:2009