Reference number
ISO 13357-2:2017
International Standard
ISO 13357-2:2017
Petroleum products — Determination of the filterability of lubricating oils — Part 2: Procedure for dry oils
Edition 3
2017-05
Preview
ISO 13357-2:2017
66353
недоступно на русском языке
Опубликовано (Версия 3, 2017)
Последний раз этот публикация был пересмотрен в  2022. Поэтому данная версия остается актуальной.

ISO 13357-2:2017

ISO 13357-2:2017
66353
Язык
Формат
CHF 63
Пересчитать швейцарские франки (CHF) в ваша валюта

Тезис

ISO 13357-2:2017 specifies a procedure for the evaluation of the filterability of dry lubricating oils, particularly those designed for hydraulic applications. The procedure only applies to mineral-based oils, since fluids manufactured from other materials (e.g. fire-resistant fluids) might not be compatible with the specified test membranes. The range of application has been evaluated with oils of viscosity up to ISO viscosity grade (VG) 100, as defined in ISO 3448. Within the range described, the filterability as defined is not dependent on the viscosity of the oil. The procedure is not suitable for some hydraulic oils on which specific properties have been conferred by the use of insoluble/partially soluble additives, or by particularly large molecular species.

NOTE Filterability is a prime requirement for lubricating oils used in hydraulic systems because of the fine filters used in this application.

ISO 13357-2:2017 defines a method for assessing the filterability of dry oils. It is necessary to note that some oils exhibit poorer filterability characteristics in the presence of contaminating water. ISO 13357‑1[2] applies to the investigation of the effect of water and high temperature on filterability, if an oil is used in applications where the presence of water in the oil is likely.

Общая информация

  •  : Опубликовано
     : 2017-05
    : Международный стандарт подлежит пересмотру [90.92]
  •  : 3
  • ISO/TC 28
    75.100 
  • RSS обновления

Новая версия в процессе разработки

Draft
International Standard
ISO/DIS 13357-2
Petroleum products — Determination of the filterability of lubricating oils — Part 2: Procedure for dry oils
Reference number
ISO/DIS 13357-2
Edition 1
Проект Международный стандарт

ISO/DIS 13357-2

Petroleum products — Determination of the filterability of lubricating oils

Part 2: Procedure for dry oils

ISO/DIS 13357-2

ISO/DIS 13357-2
86970
Язык
Формат
CHF 63
Пересчитать швейцарские франки (CHF) в ваша валюта

Жизненный цикл

Появились вопросы?

Ознакомьтесь с FAQ