Reference number
ISO 17123-6:2022
© ISO 2024
International Standard
ISO 17123-6:2022
Optics and optical instruments — Field procedures for testing geodetic and surveying instruments — Part 6: Rotating lasers
Edition 3
2022-05
Preview
недоступно на русском языке
Опубликовано (Версия 3, 2022)

ISO 17123-6:2022

Язык
Формат
CHF 151
Пересчитать швейцарские франки (CHF) в ваша валюта

Тезис

This document specifies field procedures to be adopted when determining and evaluating the precision (repeatability) of rotating lasers and their ancillary equipment when used in building and surveying measurements for levelling tasks. Primarily, these tests are intended to be field verifications of the suitability of a particular instrument for the immediate task at hand and to satisfy the requirements of other standards. They are not proposed as tests for acceptance or performance evaluations that are more comprehensive in nature.

This document can be considered as one of the first steps in the process of evaluating the uncertainty of a measurement (more specifically a measurand). The uncertainty of a result of a measurement is dependent on a number of parameters. Therefore this document differentiates between different measures of accuracy and objectives in testing, like repeatability and reproducibility (between-day repeatability), and of course gives a thorough assessment of all possible error sources, as prescribed by ISO/IEC Guide 98‑3 and ISO 17123‑1.

These field procedures have been developed specifically for in situ applications without the need for special ancillary equipment and are purposefully designed to minimize atmospheric influences.

Общая информация

  • Текущий статус
     : Опубликовано
    Дата публикации
     : 2022-05
    Этап
    : Международный стандарт подлежит пересмотру [90.92]
  • Версия
     : 3
  • Технический комитет :
    ISO/TC 172/SC 6
    ICS :
    17.180.30 
  • RSS обновления

Новая версия в процессе разработки

Draft
International Standard
ISO/DIS 17123-6
Optics and optical instruments — Field procedures for testing geodetic and surveying instruments — Part 6: Rotating lasers
Reference number
ISO/DIS 17123-6
Edition 1
© ISO 2024
Проект Международный стандарт

ISO/DIS 17123-6

Optics and optical instruments — Field procedures for testing geodetic and surveying instruments

Part 6: Rotating lasers

ISO/DIS 17123-6

Язык
Формат
CHF 63
Пересчитать швейцарские франки (CHF) в ваша валюта

Жизненный цикл

Появились вопросы?

Ознакомьтесь с FAQ

  2. Интернет-магазин
  3. Каталог стандартов
  4. МКС
  5. 17
  6. 17.180
  7. 17.180.30
  8. ISO 17123-6:2022