Filter :
Standard and/or project under the direct responsibility of ISO/TC 164/SC 3 Secretariat Stage ICS
Brinell hardness test for steel
95.99
Rockwell hardness test (B and C scales) for steel
95.99
Vickers hardness test for steel (Load 5 to 100 kgf)
95.99
Metallic materials — Verification of Vickers hardness testing machines — Part 2: Less than HV 0,2
95.99
Metallic materials — Hardness test — Verification of Vickers hardness testing machines HV 0,2 to HV 100
95.99
Metallic materials — Hardness test — Verification of Brinell hardness testing machines
95.99
Brinell hardness test for light metals and their alloys
95.99
Wickers hardness test for light metals and their alloys
95.99
Vickers hardness test for copper and copper alloys (Test loads from 2.5 to 50 kgf)
95.99
Brinell hardness test for copper and copper alloys
95.99
Metallic materials — Hardness test — Tables of Vickers hardness values for use in tests made on flat surfaces — Part 1: HV 5 to HV 100
95.99
Metallic materials — Hardness test — Tables of Vickers hardness values for use in tests made on flat surfaces — Part 2: HV 0,2 to less than HV 5
95.99
Tables of Vickers hardness values (HV) for metallic materials
95.99
Metallic materials — Hardness test — Tables of Brinell hardness values for use in tests made on flat surfaces
95.99
Metallic materials — Calibration of standardized blocks to be used for Vickers hardness testing machines — Part 2: Less than HV 0,2
95.99
Metallic materials — Hardness test — Calibration of standardized blocks to be used for Vickers hardness testing machines HV 0,2 to HV 100
95.99
Metallic materials — Hardness test — Calibration of standardized blocks to be used for Rockwell hardness testing machines (scales A - B - C - D - E - F - G - H - K)
95.99
Calibration of standardized blocks to be used for Rockwell B and C scale hardness testing machines
95.99
Metallic materials — Hardness test — Verification of Rockwell hardness testing machines (scales A - B - C - D - E - F - G - H - K)
95.99
Verification of Rockwell B and C scale hardness testing machines
95.99
Metallic materials — Hardness test — Calibration of standardized blocks to be used for Brinell hardness testing machines
95.99
Metallic materials — Hardness test — Rockwell superficial test (scales 15N, 30N, 45N, 15T, 30T and 45T)
95.99
Rockwell superficial hardness test (N and T scales) for steel
95.99
Metallic materials — Hardness test — Verification of Rockwell superficial hardness testing machines (scales 15N, 30N, 45N, 15T, 30T and 45T)
95.99
Verification of Rockwell superficial N and T scale hardness testing machines
95.99
Metallic materials — Hardness test — Calibration of standardized blocks to be used for Rockwell superficial hardness testing machines (scales 15N, 30N, 45N, 15T, 30T and 45T)
95.99
Calibration of standardized blocks to be used for Rockwell superficial N and T scale hardness testing machines
95.99
Copper and copper alloys — Rockwell superficial hardness test (N and T scales)
95.99
Copper and copper alloys — Rockwell hardness test (B, F and G scales)
95.99
Metallic and other inorganic coatings — Vickers and Knoop microhardness tests
95.99
Metallic materials — Knoop hardness test — Part 1: Test method
95.99
Metallic materials — Knoop hardness test — Part 1: Test method
95.99
Metallic materials — Knoop hardness test — Part 1: Test method
60.60
Metallic materials — Knoop hardness test — Part 2: Verification and calibration of testing machines
95.99
Metallic materials — Knoop hardness test — Part 2: Verification and calibration of testing machines
90.93
Metallic materials — Knoop hardness test — Part 3: Calibration of reference blocks
95.99
Metallic materials — Knoop hardness test — Part 3: Calibration of reference blocks
90.93
Metallic materials — Knoop hardness test — Part 4: Table of hardness values
95.99
Metallic materials — Knoop hardness test — Part 4: Table of hardness values
90.93
Metallic materials — Hardness test — Knoop test
95.99
Metallic materials — Hardness test — Verification of Knoop hardness testing machines
95.99
Metallic materials — Hardness test — Calibration of standardized blocks to be used for Knoop hardness testing machines
95.99
Metallic materials — Brinell hardness test — Part 1: Test method
95.99
Metallic materials — Brinell hardness test — Part 1: Test method
95.99
Metallic materials — Brinell hardness test — Part 1: Test method
90.92
Metallic materials — Brinell hardness test — Part 1: Test method
40.99
Metallic materials — Brinell hardness test — Part 2: Verification and calibration of testing machines
95.99
Metallic materials — Brinell hardness test — Part 2: Verification and calibration of testing machines
95.99
Metallic materials — Brinell hardness test — Part 2: Verification and calibration of testing machines
95.99
Metallic materials — Brinell hardness test — Part 2: Verification and calibration of testing machines
90.92
Metallic materials — Brinell hardness test — Part 2: Verification and calibration of testing machines
40.99
Metallic materials — Brinell hardness test — Part 3: Calibration of reference blocks
95.99
Metallic materials — Brinell hardness test — Part 3: Calibration of reference blocks
95.99
Metallic materials — Brinell hardness test — Part 3: Calibration of reference blocks
90.92
Metallic materials — Brinell hardness test — Part 3: Calibration of reference blocks
40.99
Metallic materials — Brinell hardness test — Part 4: Table of hardness values
95.99
Metallic materials — Brinell hardness test — Part 4: Table of hardness values
90.93
Metallic materials — Hardness test — Brinell test
95.99
Metallic materials — Hardness test — Vickers test — Part 1: HV 5 to HV 100
95.99
Metallic materials — Vickers hardness test — Part 1: Test method
95.99
Metallic materials — Vickers hardness test — Part 1: Test method
95.99
Metallic materials — Vickers hardness test — Part 1: Test method
95.99
Metallic materials — Vickers hardness test — Part 1: Test method
60.60
Metallic materials — Hardness test — Vickers test — Part 2: HV 0,2 to less than HV 5
95.99
Metallic materials — Vickers hardness test — Part 2: Verification of testing machines
95.99
Metallic materials — Vickers hardness test — Part 2: Verification and calibration of testing machines
95.99
Metallic materials — Vickers hardness test — Part 2: Verification and calibration of testing machines
90.93
Metallic materials — Hardness test — Vickers test — Part 3: Less than HV 0,2
95.99
Metallic materials — Vickers hardness test — Part 3: Calibration of reference blocks
95.99
Metallic materials — Vickers hardness test — Part 3: Calibration of reference blocks
95.99
Metallic materials — Vickers hardness test — Part 3: Calibration of reference blocks
90.93
Metallic materials — Vickers hardness test — Part 4: Tables of hardness values
95.99
Metallic materials — Vickers hardness test — Part 4: Tables of hardness values
90.93
Metallic materials — Rockwell hardness test — Part 1: Test method (scales A, B, C, D, E, F, G, H, K, N, T)
95.99
Metallic materials — Rockwell hardness test — Part 1: Test method (scales A, B, C, D, E, F, G, H, K, N, T)
95.99
Metallic materials — Rockwell hardness test — Part 1: Test method
95.99
Metallic materials — Rockwell hardness test — Part 1: Test method
95.99
Metallic materials — Rockwell hardness test — Part 1: Test method
60.60
Metallic materials — Rockwell hardness test — Part 2: Verification and calibration of testing machines (scales A, B, C, D, E, F, G, H, K, N, T)
95.99
Metallic materials — Rockwell hardness test — Part 2: Verification and calibration of testing machines (scales A, B, C, D, E, F, G, H, K, N, T)
95.99
Metallic materials — Rockwell hardness test — Part 2: Verification and calibration of testing machines and indenters
95.99
Metallic materials — Rockwell hardness test — Part 2: Verification and calibration of testing machines and indenters
60.60
Metallic materials — Rockwell hardness test — Part 3: Calibration of reference blocks (scales A, B, C, D, E, F, G, H, K, N, T)
95.99
Metallic materials — Rockwell hardness test — Part 3: Calibration of reference blocks (scales A, B, C, D, E, F, G, H, K, N, T)
95.99
Metallic materials — Rockwell hardness test — Part 3: Calibration of reference blocks
95.99
Metallic materials — Rockwell hardness test — Part 3: Calibration of reference blocks
60.60
Metallic materials — Hardness test — Rockwell test (scales A - B - C - D - E - F - G - H - K)
95.99
Metallic materials — Hardness testing — Tables of Knoop hardness values for use in tests made on flat surfaces
95.99
Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 1: Test method
95.99
Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 1: Test method
90.92
Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 1: Test method
40.60
Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 2: Verification and calibration of testing machines
95.99
Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 2: Verification and calibration of testing machines
90.92
Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 2: Verification and calibration of testing machines
40.60
Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 3: Calibration of reference blocks
95.99
Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 3: Calibration of reference blocks
90.92
Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 3: Calibration of reference blocks
40.60
Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 4: Test method for metallic and non-metallic coatings
95.99
Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 4: Test method for metallic and non-metallic coatings
90.93
Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 5: Linear elastic dynamic instrumented indentation testing (DIIT)
60.60
Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 6: Instrumented indentation test at elevated temperature
40.20
Metallic materials — Hardness test — Universal test
95.99
Metallic materials — Leeb hardness test — Part 1: Test method
90.93
Metallic materials — Leeb hardness test — Part 2: Verification and calibration of the testing devices
90.93
Metallic materials — Leeb hardness test — Part 3: Calibration of reference test blocks
90.93
Metallic materials — Conversion of hardness values
95.99
Metallic materials — Conversion of hardness values
90.93
Metallic materials — Instrumented indentation test for hardness and materials parameters — Evaluation of stress change using indentation force differences
60.60
Metallic materials — Measurement of mechanical properties by an instrumented indentation test — Indentation tensile properties
90.93

No matching records found. Please try changing the filter settings.