Reference number
ISO 6162-2:2018
© ISO 2024
International Standard
ISO 6162-2:2018
Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 2: Flange connectors, ports and mounting surfaces for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76
Edition 3
2018-03
Read sample
Published (Edition 3, 2018)
This publication was last reviewed and confirmed in 2023. Therefore this version remains current.

ISO 6162-2:2018

Language
Format
CHF 129
Convert Swiss francs (CHF) to your currency

Abstract

ISO 6162-2:2018 gives general and dimensional specifications for flanged heads, split flange clamps (FCS and FCSM), one-piece flange clamps (FC and FCM), ports and mounting surfaces applicable to four-screw, split and one-piece flange clamp type tube connectors and hose fittings for use at a pressure of 42 MPa (420 bar[1]). It also specifies the dimensions of the seals to be used, as well as the grooves that house the seals.

ISO 6162-2:2018 also recognizes the need to accommodate metric screw fasteners (type 1) (for DN 13 to DN 76), as well as to provide a means to use existing inch screw fasteners (type 2) (for DN 13 to DN 51).

These connections are intended for application in hydraulic systems on industrial and commercial products where it is desired to avoid the use of threaded connectors.

[1] 1 bar = 0,1 MPa = 105 Pa; 1 Pa = 1 N/m2.

General information

  • Status
     : Published
    Publication date
     : 2018-03
    Stage
    : International Standard confirmed [90.93]
  • Edition
     : 3
    Number of pages
     : 21
  • Technical Committee :
    ISO/TC 131/SC 4
    ICS :
    23.100.40 
  • RSS updates

Life cycle

Sustainable Development Goals

This standard contributes to the following Sustainable Development Goal

9
Industry, Innovation and Infrastructure

Got a question?

Check out our Help and Support

  2. Store
  3. Standards catalogue
  4. ICS
  5. 23
  6. 23.100
  7. 23.100.40
  8. ISO 6162-2:2018